Moving on up ....so I bought an enlarger

Discussion in 'Contact Printing' started by Rob Skeoch, Dec 16, 2005.

  1. Rob Skeoch

    Rob Skeoch Advertiser Advertiser

    Messages:
    983
    Joined:
    Apr 25, 2005
    Location:
    Burlington,
    Shooter:
    35mm RF
    Sorry guys... I had to do it.
    I didn't like making contact prints.... maybe it's the size.... or my work needs a crop.... or I couldn't burn and dodge very well.... or I could never get the glass clean. Hey just because it worked for Weston doesn't mean it's for everyone.
    Anyway I bought a Beseler with a 8x10 cold head and a lens... now once I get this baby set up, I'll be all set. On a new adventure, off to the races as they say.
    This is the last thing I need, now my pictures can be great .... it's my silver bullet.
    At least until tomorrow... when my pictures still suck, only in a bigger way, and now you can see the grain... and lack of focus, and the dust wasn't on the glass, it was in the film holder.
    I'm not going to sell that piece of glass just yet.
    Too bad i just stocked up on multigrade.... now I have to use graded paper.
    -Rob Skeoch
    Keeping Ilford in business one print at a time.
     
  2. Claire Senft

    Claire Senft Member

    Messages:
    3,242
    Joined:
    Dec 7, 2004
    Location:
    Milwaukee, W
    Shooter:
    35mm
    Silver bullet?? Are you into photography or are you hunting werewolves. For sure werewolves are no damn good at all for contact printing.
     
  3. Donald Qualls

    Donald Qualls Member

    Messages:
    1,845
    Joined:
    Jan 19, 2005
    Location:
    North Caroli
    Shooter:
    Multi Format
    Why would you need to use graded paper? I have a cold light and (as Claire said it would) it works just fine with multigrade. I split filter, but that's mostly a budget decision; two filters cost a lot less than a full set, and that goes double if you use theatrical lighting filters.

    Don't forget, there's only one way to make an 8x10 print that has the depth and crispness of a 4x5 contact print: make an 8x10 contact print. At least the dust on the glass isn't enlarged when it shows up white on your print...