Neutral rapid fixer

Neutral rapid fixer

  1. Ryuji

    Ryuji Member

    Messages:
    1,416
    Joined:
    Jan 15, 2005
    Location:
    Boston, MA
    Shooter:
    Multi Format
    Ryuji submitted a new resource:

    Neutral rapid fixer - Neutral rapid fixer

    Read more about this resource...
     
    Last edited by a moderator: Feb 6, 2016
  2. Sean

    Sean Admin Staff Member Admin

    Messages:
    9,336
    Joined:
    Aug 29, 2002
    Location:
    New Zealand
    Shooter:
    Multi Format
    Comments from previous system:

    By bozgoren - 09:43 AM, 02-11-2005 Rating: None
    Is this film strength or print? Do you use straight or 1:4? Bulent Ozgoren

    By Ryuji - 05:46 PM, 02-11-2005 Rating: None
    This is for both film and paper. Use undiluted.

    By jdef - 06:41 AM, 03-10-2005 Rating: None
    Ryuji,
    what is the capacity of this fixer with film and paper?
    Jay

    By Ryuji - 08:28 PM, 03-11-2005 Rating: None
    The right answer is it depends. For films the fixer should be discarded after about 20 80sqi per liter. For prints, it depends on how you wash and tone the prints. 40-60 80sqi of fiber and 60-80 80sqi of RC are the numbers I use as a guide.

    But you know what? If you are a serious fine art darkroom printer who care about permanence of the results, make a small batch of 1.0M KI to test fixer, and another batch of silver nitrate residual fixer test solution, and keep them in amber drop bottles. You'll sleep well with them.
    (Nothing is better than having a hard evidence that the print is properly fixed and washed, espcially because these tests are easy enough.)

    By Ryuji - 08:32 PM, 03-11-2005 Rating: None
    I should also add that the fixer's capacity depends on agitation and temperature. Also, watch out for the dilution of the bath due to stop bath carryover. Two stage fixation is one effective way to ensure good results, although it is unnecessary with ammonium thiosulfate fixer when it is not pushed to exhaustion.

    By jdef - 10:56 PM, 03-11-2005 Rating: None
    Thanks, Ryuji.
    Jay

    By dancqu - 12:23 AM, 04-02-2006 Rating: None
    "... and another batch of silver nitrate residual fixer test solution ..."
    Would you care to offer a formula? I've read of and I'm quite sure
    experienced the death of such a test solution gotten from the
    P. Formulary. I can't think of any reason it should die. Might
    it be because of the acetic acid. I've a formula variation
    which skips the acid. What do you suggest? Dan
     
  3. Keith Tapscott.

    Keith Tapscott. Member

    Messages:
    1,426
    Joined:
    Jun 11, 2005
    Location:
    Plymouth. UK
    Shooter:
    Multi Format
    Tetenal Superfix Odourless is claimed to be pH neutral if anyone is interested in a commercially available fixer.