New To Color Film processing - suggestions

Discussion in 'Color: Film, Paper, and Chemistry' started by htmlguru4242, May 15, 2006.

  1. htmlguru4242

    htmlguru4242 Member

    Messages:
    973
    Joined:
    Aug 9, 2005
    Location:
    Sandy Hook,
    Shooter:
    Multi Format
    I've recently regained interest in color, and have decided to jump right into C41 processing (why not?), so I've obtained a Photocolor C41 kit (super cheap - contains dev and blix.)

    Any suggestions on processing - are the stock instructions good, or anything special?

    Is it necessary to run the process at the high temperature, or can it be done a tad lower?

    I'll be using a manual tank.
     
  2. glbeas

    glbeas Member

    Messages:
    3,307
    Joined:
    Sep 25, 2002
    Location:
    Roswell, Ga.
    Shooter:
    Multi Format
    Use a water bath to set your tank in, follow directions to the letter like a cookbook and you'll have fine results.
     
  3. htmlguru4242

    htmlguru4242 Member

    Messages:
    973
    Joined:
    Aug 9, 2005
    Location:
    Sandy Hook,
    Shooter:
    Multi Format
    Excellent, I'll try that!