Omega B22 XL condensers

Discussion in 'Darkroom Equipment' started by Chuck (CA), Dec 23, 2002.

  1. Chuck (CA)

    Chuck (CA) Member

    Messages:
    70
    Joined:
    Oct 13, 2002
    Location:
    Fresno CA
    I pulled my Omega B22 XL out of storage. Could use some help with the condensers.

    I have two condensers and a seperation ring. Is this all there is? Is there an aux condenser?

    Thanks for the help!
    Chazz
     
  2. lee

    lee Member

    Messages:
    2,913
    Joined:
    Nov 23, 2002
    Location:
    Fort Worth T
    Shooter:
    8x10 Format
    that is all there needs to be. I have seen a smaller aux condenser but I don't think you need it. The condenders need to be separated by the metal ring and they need to be installed in the housing so that each piece of glass has the flat side either up or down. Be really careful as you don't want to chip them. They need to be clean.

    lee
     
  3. Brian

    Brian Member

    Messages:
    20
    Joined:
    Jan 13, 2003
    The aux condensor is for use with 35mm, take it out when printing 6x6.
     
  4. Brian

    Brian Member

    Messages:
    20
    Joined:
    Jan 13, 2003