I'm looking for a 6x7 negative carrier for the Omega C700. I would consider a 6x6 as well and go to town on it with the Dremel The 6x6 is also the same carrier that works on the B-66, B22, B600, and Concept Six Models so any of those will work. I'm also interested in 2 of the heat absorbing glass inserts. Feel free to email me for a faster response: billp <at> billpratt <dot> net Thanks, -Bill

I have some parts for a C-67 enlarger that may fit. A previous ad from a year or so listed the following items. Some may be gone however, if any of the items are of interest I will check to see if I still have them. 421-017 Lens Disc - 39mm hole for B-22, B-66, and C-67 enlargers 423-219 35mm Full Frame Negative Carrier 423-224 2¼"x2¾" (6x7cm) Negative Carrier 473-124 Heat Absorbing Glass for condenser lamphouse 472-053 Standard Condenser for condenser lamphouse 472-054 Auxiliary Condenser for 35mm and smaller formats 471-038 Opal Lamp 75w/120v for condenser lamphouse

I have no idea if any of them will fit. I know the part numbers are different but I also know that doesn't mean they won't. I'm interested in the 473-124 (2 of them) if they will fit. The current model is http://www.bhphotovideo.com/c/product/39338-REG/Omega_473121_Heat_Absorbing_Glass_for.html. I would also be interested in the 423-219 and 423-224 if they will fit. They definitely look different but again, I don't know if they will fit. http://www.bhphotovideo.com/c/product/39563-REG/Omega_423127_6x7cm_2_25_x_2_75.html is what the negative carriers look like. Let me do a bit of research to see what I can find out about cross-comaptibility. I'll email omega.

I could not find the carriers, must of already already sent to someone. What I have left is sets of 3" & 4 inch condensers, heat shield glass and holder. Photos of the enlarger and parts attached. Note! Middle photo, only the condensers are available.

I'll find out on the heat glass and negative carriers. The condensors are much larger than the C700. I also have a couple of D series, but since I'm moving I'm using the C700's until I get settled and set up my darkroom again. Thanks, -Bill