I have 2 ESECO Speedmaster Compucolor printing systems on Omega D5XL enlargers. One is a Pro-45 and the other is an Auto-45. The difference is the Auto-45 has sensors that compute the position of the lens and distance to the easel. I never used this feature but have tested it and it works. Each enlarger has a 5X5, 3X3 and 35mm mixing chamber. The Auto-45 comes with 4X5, 6X6, 6X7, and 6X9 carriers. The 6X9 is for cut film. The Pro-45 comes with 6X7, 6X9 and 35mm carrier. This 6X9 is for roll film. They each come with a book which explains how to program the computer unit and set everything up. They each come with a 3 lens turret with lenses mounted. Auto-45 lenses are: 150mm Schneider Componon 90mm Rodenstock Omergaron 50mm Schneider Componon Pro-45 lenses are: 135mm Schneider Componon 80mm Schneider Componon 50mm EL Nikkor I am also including extra ELC lamps but honestly with the shutter system these heads use the lamps last a long long time. The lamps are always in a low voltage state and when you hit focus or print the shutter opens and the lamp is at full power instantly which not only keeps the lamp from burning out but gives a very constant light output. I had a custom lab and only changed lamps when they started losing output and that was about once a year. I am asking $500 for each enlarger. PayPal or money order. If your are interested in both I will give you a great deal. I bought these enlargers new (Auto-45 was $15,000 and the Pro-45 was $12,000 that's without the turrets and lenses) and they are in very good condition. They show ware but only from normal use. The only thing that is very worn on both is the locking rail. I have a new rail for the Auto-45 and it is included. The locks do still work on both. I have been printing for a very long time and this is my all time favorite enlarging system. I also had 2 DeVere 504 enlargers with the same system and they are great but for speed and ease the Omegas are my pick. I am in Henderson NV so if your close enough you could come pickup one or both and I can show you how they work. They are setup and plugged in so the computers do not lose their memory. They have chargeable IC sockets so if they are unplugged for a long time they will lose their memory. I can ship by UPS but I have no idea what that might cost so we can figure that out if you are interested. My reason for selling is I just don't print much anymore so they take up space and I hate to take them apart and put in storage. I can't give printing up all together so I am keeping one Omega D5XL for when I have the erg to do some B&W. The enlarger in the pic is the Pro-45 but the Auto-45 looks identical. The other pic is one of the turrets and some of the carriers. Any questions just ask.