Photogravure/Photopolymer/Carbon printing

Discussion in 'Alternative Processes' started by delphine, Jul 25, 2010.

  1. delphine

    delphine Member

    Messages:
    628
    Joined:
    Jun 7, 2007
    Location:
    London (UK)
    Shooter:
    Medium Format
    Hi all,

    I am wondering if some people have experience of using these three different processes (or two at least):
    - Photogravure or Heliogravure
    - Photopolymer printing plates
    - Carbon printing

    If so, skipping on the differences and pros/cons of the different processes, could you talk about the output differences and how they compare in terms of tonal range, surface texture, overall aesthetic, etc, that you observed.

    Past the learning curve, are you using one of these processes, or several? What would derive your decision to choose one technique over the other? would it derive from the photograph? or from the logistics involved with producing the print?

    About photogravure/heliogravure in particular.
    Did you implement successfully the new gravure tissue produced by Bosticks & Sullivan in your workflow? If one is not considering producing his own tissue, is it worth pursuing with photogravure after the defunct autotype tissue?

    I am looking forward to your input,

    Thank you !

    Delphine
     
  2. Andrew O'Neill

    Andrew O'Neill Subscriber

    Messages:
    1,248
    Joined:
    Jan 16, 2004
    Location:
    Coquitlam, B
    Shooter:
    8x10 Format
    My background is in printmaking. I've done lithography including photo-litho on plates and stones, which was my main interest. I've done Intaglio/photo gravure. I've also done serigraphy using photographic images.
    I do not have a proper press but hope to one day.
    Now I am working in carbon making my own tissues. It's a lovely process with much richer tonalities than what I could ever get from photogravure or lithography. The image is in relief somewhat like a gravure's.
     
  3. Jim Fitzgerald

    Jim Fitzgerald Member

    Messages:
    1,798
    Joined:
    Aug 6, 2005
    Location:
    Ventura, Ca
    Shooter:
    ULarge Format
    I'm also a carbon printer in California. It is my passion and gives me everything I could ask for with my images. I've heard of the other processes but I would have to compare side by side to judge but so far for me nothing beats carbon transfer.