PHSC Swap Meet: "The Big One" Returns Oct. 2 2011

Discussion in 'Toronto' started by CGW, Sep 1, 2011.

  1. CGW

    CGW Member

    Messages:
    2,797
    Joined:
    Apr 19, 2010
    Shooter:
    Medium Format
  2. Axle

    Axle Member

    Messages:
    543
    Joined:
    Nov 30, 2010
    Location:
    Milton, ON
    Shooter:
    Multi Format
    I would love to go...but I have a wedding that day.
     
  3. Mike Wilde

    Mike Wilde Member

    Messages:
    2,936
    Joined:
    Aug 10, 2006
    Location:
    Misissauaga
    Shooter:
    Multi Format
    I got my form from PHSC asking if I wanted to rent a table. I think I will wait until the spring one to be a vendor again.

    In the fall I always have a surplus of negatives taken over the spring and summer awaiting a serious printing session.
    The cooler weather and fall rains seems to allow darkroom sessions to happen more readily than nice summer nights do.

    So my backlog of work to be printed, sorted, matted, mounted, etc. overwhelms the urge to buy and sell more gear for the fall show.
     
  4. JohnMeadows

    JohnMeadows Subscriber

    Messages:
    307
    Joined:
    Jul 27, 2010
    Location:
    Toronto, Ont
    Shooter:
    Medium Format
    I certainly hope to go this time around! (Although probably the most dangerous thing I could do ....) :smile:
     
  5. Len Middleton

    Len Middleton Member

    Messages:
    110
    Joined:
    Nov 18, 2005
    Location:
    Greater Toro
    Shooter:
    Large Format
    I will be in Calgary that weekend, so will obviously miss it.

    Still no response from the Calgary LF group about anything going on that weekend.
     
  6. naeroscatu

    naeroscatu Subscriber

    Messages:
    880
    Joined:
    Oct 15, 2004
    Location:
    Newmarket On
    Shooter:
    Multi Format
    I have so much stuff that I'm ashamed to think of going because if I do I will probably end up buying again. Nice to own stuff but is so bad when you have no time to use it:sad:
    I'm actually considering getting a table on the spring show and start getting rid of excess equipment and accessories.
     
  7. Len Middleton

    Len Middleton Member

    Messages:
    110
    Joined:
    Nov 18, 2005
    Location:
    Greater Toro
    Shooter:
    Large Format
    I did that for a while.

    Found I did get rid of a lot of gear, but seemed like I did not make any money, as I spent it getting better gear... :D
     
  8. Uncle Bill

    Uncle Bill Subscriber

    Messages:
    1,380
    Joined:
    Apr 24, 2005
    Location:
    Oakville and
    Shooter:
    Multi Format
    I'm double booked that day with another event.
     
  9. Plate Voltage

    Plate Voltage Member

    Messages:
    48
    Joined:
    Jul 23, 2011
    Shooter:
    Multi Format
    I might go and look for some medium format equipment if work doesn't get in the way...