I am using rollo pyro with Ilford HP5 in a Jobo tank on a unicolor roller. I am processing 2 rolls at one time of 120. I have attached a scan of what is happening to the first frame or so of each roll. Yesterday I filled the tank while it was rotating (just as I do with my expert drums) and I had this problem with both rolls of film. Today I filled the tank while it was upright and off the roller base and I had the same problem. Prior to using the unicolor roller I had hand rolled the tank back and forth in the darkroom sink but I was getting (sometimes) a spiral pattern in skies. Any help is appreciated!