Processing your own Black and White transparencies

Processing your own Black and White transparencies

  1. Claude

    Claude Member

    Messages:
    210
    Joined:
    Jan 10, 2005
    Location:
    Strasbourg/F
    Shooter:
    Large Format
    Claude submitted a new resource:

    Processing your own Black and White transparencies - Processing your own Black and White transparencies

    Read more about this resource...
     
    Last edited by a moderator: Feb 6, 2016
  2. Sean

    Sean Admin Staff Member Admin

    Messages:
    9,297
    Joined:
    Aug 29, 2002
    Location:
    New Zealand
    Shooter:
    Multi Format
    Comments from the previous article system:

    By Jordan - 03:43 PM, 07-08-2005 Rating: None
    Claude, this is nice. Are you aware of the informational PDF on the Ilford web site about processing? It provides reliable formulae and times for reversal-processing Pan F and FP4 Plus.
    I have a couple of comments on your process:
    (1) Instead of re-exposure and re-development, you can substitute a sepia-toning bath. This directly converts the silver halide to silver sulfide, and you get nice warm chocolate-coloured slides. The effect is pleasing with Pan F. With TMAX films the colour is very "orange" due to the crystal phases of the silver halide.
    (2) You can substitute sodium bisulfate (not bisulfite) for the sulfuric acid. Sodium bisulfate is a solid that dissolves in water to create the equivalent of sulfuric acid. It is sold cheaply for people who have back-yard pools, as an agent to reduce the pH of the pool (trade name here in Canada and also in the US is "pH Minus&quot. If you need a formula, I can provide it.
    (3) I agree with you for the most part about the permanganate. However, the guy behind DR5 (www.dr5.com) has reported some archival problems with permanganate. Also, it must be mixed right before use since it goes bad quickly (dichromate is stable).
    I have a summary of B&W slide options here: http://www.photosensitive.ca/BWslides.shtml

    By Claude - 05:05 PM, 07-08-2005 Rating: None
    Hello Jordan,
    thank you for your comments and links, it's allways interesting to exchange informations. I knew the sepia process but .... I do not like the chocolate color
    I allways mix my chemicals just before use. What I forgot to say was that permanganate must be strongly mixed. (Even with a magnetic stirrer).
    Claude