RA4 Color Paper

Discussion in 'Color: Film, Paper, and Chemistry' started by Ula, Feb 11, 2010.

  1. Ula

    Ula Member

    Messages:
    2
    Joined:
    Feb 12, 2008
    Shooter:
    35mm
    Hey Guy's

    I'm looking for a nice color paper but have only used the Kodak Supra untill now so i was curious to know your expierences with other papers.
    I'm doing a large series of night shots and had the idea to print them on a paper wich gave me the collours of the late 70s and 80s. I'm not really into the sharp colors of today.

    any experiences?

    Thanks
     
    Last edited by a moderator: Feb 11, 2010
  2. Mike Wilde

    Mike Wilde Member

    Messages:
    2,936
    Joined:
    Aug 10, 2006
    Location:
    Misissauaga
    Shooter:
    Multi Format
    Do you mean the look of prints of the 70's and 80's as they look today, or as they looked from publications that printed them back in the 70's and 80's? If you are looking for the aged print experience, i'm not so sure.

    I get a funky old look by using parts form a can of 100' of frozen but long past best before date Ektachome 5012 and dev in e-6 for 6 minutes FD, rather than 7. It gives a dark but low contrast result. Then make an interneg on copy film and expose to lighten the dark original and print on modern paper.
     
  3. pentaxuser

    pentaxuser Subscriber

    Messages:
    7,928
    Joined:
    May 9, 2005
    Location:
    Daventry, No
    Shooter:
    35mm
    Today there is Supra Endura or there is ...Supra Endura. No choice really as Ultra or the metallic look wouldn't suit what you seem to want. You probably can get Fuji CA in sheets if you look hard but I don't think this will be any better than Supra or even some old Agfa or Konica RA4 but unless you are prepared to be disappointed due to its age I don't I'd bother.

    I suspect the key here is to find a film which doesn't give you the sharp( saturated?) colours and films such as Kodak Porta NC might fit the bill.

    pentaxuser
     
  4. tim elder

    tim elder Member

    Messages:
    146
    Joined:
    Oct 9, 2005
    Location:
    New York, NY
    Shooter:
    Multi Format
    I don't know exactly what you mean by sharp colors, of course, but you can alter color balance and exposure quite a bit in color printing to get the effect that you want.

    Tim
     
  5. hrst

    hrst Member

    Messages:
    1,300
    Joined:
    May 10, 2007
    Location:
    Finland
    Shooter:
    Multi Format
    Bleach bypass or partial bleaching to mute colors? Fix, bleach, bw developer, fix? Adding sulfite to color developer (sodium sulfite 0.3-1.0 g/l) to decrease contrast? You can try all kind of tricks. Experiment.
     
  6. tiberiustibz

    tiberiustibz Member

    Messages:
    1,749
    Joined:
    Oct 22, 2007
    Location:
    Tufts Univer
    Shooter:
    35mm
    Try rolls of royal generations minilab paper. It only comes in rolls so enjoy cutting. It appears to be slightly less saturated than Supra. Using Portra 160NC will get you some duller colors, and you can try lowering contrast by adding...some chemical. Ask PE.
     
  7. Ed Sukach

    Ed Sukach Member

    Messages:
    4,519
    Joined:
    Nov 27, 2002
    Location:
    Ipswich, Mas
    Shooter:
    Medium Format
    I've used the Fuji Crystal Achive, with great success.