After leaving my negatives to dry, I came back to find they were covered in a white/milky residue. I tried to remove it on an unexposed part of the film, and it comes off, but I'm confused as to what caused it. The only thing I did differently this time was use hypo clearing solution after fixing. My process went like this: 1. Develop in HC-110 2. Stop Bath (Kodak Indicator) 3. Fixer (Kodak fixer, the powder stuff). 4. Hypo (Kodak) 5. Wash 6. Another run through Hypo. Is it residue from hypo? I mean i figure it might be since its a sodium based formula. Please help me if you have any ideas, thanks!