I am having a bit of hard time figuring this out. I have a print that mostly looks correct at an exposure of 19.5 seconds, however, 4 or 5 relatively small areas that need a 1/3 stop dodge each. I want to program these 5 dodges in as steps, as the dodges are in different areas of the print, and I'd like to use different dodging tools. I have read and re-read the manual, but I am unsure of how to program this in as "steps" in the device. Setting up additional burn in steps, over and above a base exposure, is easy, but I can't get my head around how to do multiple dodges, each of which wind up being 1/3 less exposure than my "base" 19.5 second exposure. Anyone?