Series 8 Filter Frame Holder for 3-inch filter frames.

Discussion in '[Classifieds] For Sale' started by laser, Feb 20, 2011.

Thread Status:
Not open for further replies.
  1. laser

    laser Advertiser Advertiser

    Messages:
    576
    Joined:
    Jun 16, 2005
    Shooter:
    4x5 Format
    Series 8 Filter Frame Holder for 3-inch filter frames.

    This is a heavily built holder for filter frames that can hold sheet ie. Lee, Wratten etc. . It can hold 1, 2 or 3 filter frames at a time. the front panel is 3/16 inch thick and will accept Series VIII or 67mm lens hood. The second panel (back of the slot for holding the filter frame) is .050 inch thick. A series VIII adapter ring is mounted on this panel so it is very strong. It is a very strong filter holder.

    One Filter Frame is included.

    The attached photo is a montage of both sides of the filter holder.


    $10 including shipping to a USA shipping address.

    Contact: robertshanebrook@yahoo.com

    p.s. I also have listed on APUG an adapter that will connect to a Commercial EKTAR 10-inch.
     

    Attached Files:

  2. tjaded

    tjaded Subscriber

    Messages:
    1,022
    Joined:
    Oct 15, 2006
    Location:
    San Francisc
    Shooter:
    Multi Format
    e-mail sent.
     
Thread Status:
Not open for further replies.