Sheet film developing stuff

Discussion in '[Classifieds] For Sale' started by binglebugbob, Jun 8, 2013.

  1. binglebugbob

    binglebugbob Subscriber

    Messages:
    718
    Joined:
    Mar 2, 2007
    Location:
    Tacoma, WA USA
    Shooter:
    Medium Format
    Eight (8) Carr 4x5 Stainless Steel film hangers, $12 (all prices plus shipping)

    Nine (9) Kodak 4x5 " " " " $15 "

    Eight (8) Carr 3-1/4 x 4-1/4 " " " $10 "

    Four (4) Kodak 3-1/4 x 4-1/4 $ 5 "

    Seven (7) Urell 3-1/4 x 4-1/4 " " " $10 (all prices plus shipping)

    The horizontal cross pieces are all about 8.5 inches long, so they apparently all are made to fit in 8x10 tanks. I doubt any one brand is better or worse than another, but they are being sold in lots by maker's label because loading different hangers in the dark is probably rather..."frustrating".

    ALSO have one Yankee sheet film developing tank with loading guide for 2x3, 3x4 and 4x5 film. These work fairly well if you agitate so that chemicals slosh parallel to (and between) the film sheets and not 90 degrees to them. $20 plus shpg.

    Please reply PRIVATELY.
     
  2. binglebugbob

    binglebugbob Subscriber

    Messages:
    718
    Joined:
    Mar 2, 2007
    Location:
    Tacoma, WA USA
    Shooter:
    Medium Format
    Bump. Still have the 3-1/4 x 4-1/4" hangers.

    Also found one 5x7 hanger, $6 plus shipping.

    The rest is gone.
     
  3. binglebugbob

    binglebugbob Subscriber

    Messages:
    718
    Joined:
    Mar 2, 2007
    Location:
    Tacoma, WA USA
    Shooter:
    Medium Format
    Bump. I found Nine more "Carr" 4x5 stainless steel hangers, $15 plus shipping.

    Still have the 5x7 hanger (one only), and the 3x4 hangers

    Please reply privately.