Shutter question

Discussion in 'Large Format Cameras and Accessories' started by dustym, Jul 31, 2006.

  1. dustym

    dustym Member

    Messages:
    165
    Joined:
    Oct 16, 2005
    Location:
    Essex, just
    Shooter:
    Multi Format
    The shutter size is not indicated on my camera I have a Linhof snyncro compur I dont know if it is a zero or a one, the lens is a schnieder 210mm

    Can anybody help.

    rgds
    Dusty
     
  2. Ole

    Ole Moderator Staff Member Moderator

    Messages:
    9,281
    Joined:
    Sep 9, 2002
    Location:
    Bergen, Norw
    Shooter:
    Large Format
    Which Schneider 210???

    The Xenar 210 f:4.5 takes a #3.
    The Xenar 210 f:6.1 takes a #1.
    The Symmar 210 f:5.6 can be in a #1 or #2, or even a #3 depending on age.
    The G-Claron 210 f:9 is also in a #1.
     
  3. cdholden

    cdholden Member

    Messages:
    750
    Joined:
    Aug 9, 2005
    Location:
    Nashville, T
    Shooter:
    Multi Format
  4. dustym

    dustym Member

    Messages:
    165
    Joined:
    Oct 16, 2005
    Location:
    Essex, just
    Shooter:
    Multi Format
    Its the repro claron 1:9.210
     
  5. Ole

    Ole Moderator Staff Member Moderator

    Messages:
    9,281
    Joined:
    Sep 9, 2002
    Location:
    Bergen, Norw
    Shooter:
    Large Format
    Should be a #1 then. You can check to see if the front and rear cell threads are different - only the #1 size has that among "common" shutters.
     
  6. jimgalli

    jimgalli Subscriber

    Messages:
    3,571
    Joined:
    Sep 7, 2002
    Location:
    Tonopah Neva
    Shooter:
    ULarge Format
    Some of the later Repro Claron's in the 11,000,000 serials are in Copal 0 size. Mounting hole would be about 32mm and some of the earlier ones are in Compur 2 size which has a mounting hold of around 50mm. None are in a #1 size.