Slide "Prints" From Negatives

Discussion in 'Color: Film, Paper, and Chemistry' started by FilmIs4Ever, Feb 23, 2005.

  1. FilmIs4Ever

    FilmIs4Ever Restricted Access

    Messages:
    377
    Joined:
    Jan 13, 2004
    Location:
    Cleveland, O
    Does anyone know how this is best accomplished in a home environment? I have no trouble with souping my own ECP chemistry or with buying large bulks of print film. Is there any trouble with printing C-41 onto color [movie] print film? Would it be better using ECN-2 for prints? Also, with regard to ECN-2, is it true that it makes for inadequate paper prints? I know that there's a lab in Florida that does this, but I'd rather do it myself.

    ~Regards.
    Karl Borowski
     
  2. steve

    steve Member

    Messages:
    243
    Joined:
    Sep 12, 2002
    What you really need is a material that's been discontinued - Kodak Vericolor Slide Film or Kodak Vericolor Print Film. This was film for making a positive (slide) image from a color negative. The slide film was 35mm and could be used in a slide duplicator setup. The Print Film was 4x5 and could be used to make enlarged positives.

    Your only solution today would be to use motion picture intermediate film (interpositive), or to have the film scanned and output to a film recorder onto slide film.

    I'm confused by your references to ECN-2. This is the motion picture film developing process (like C-41 or E-6).

    Kodak does have a new intermediate motion picture film that does not have the rem-jet backing so it does away with the rem-jet removal steps. There is publication on the Kodak website -

    KODAK Publication No. H-24.07, Processing KODAK Motion Picture Films, Process ECN-2 Specifications, Module 7. The publication describes the ECN-2 motion picture film developing formulas.

    There are ECN-2 processing kits available, but they are large sizes as it is assumed that you're using a motion picture film processor.

    I'm a bit confused by your question about making "inadequate paper prints." You can, of course, make paper prints directly from the negatives you currently have.
     
  3. FilmIs4Ever

    FilmIs4Ever Restricted Access

    Messages:
    377
    Joined:
    Jan 13, 2004
    Location:
    Cleveland, O
    Sorry, I'm confusing you with the word "print" which happens to me a lot going back and forth between the MP and still photography sectors. I'm asking if it's just better to use ECN-2 MP film to make film positive prints rather than C-41 onto MP print film. I'm reluctant to use ECN-2 not only because of the difficulty in obtaining chemistry, but also because I've heard that you can't make prints onto RA-4 without them looking crummy. As for Vericolor, can I still get somewhere? Does anyone have a few rolls of the stuff laying around?

    Regards.
    ~Karl Borowski