Some comments about my book and my work.

Discussion in 'Silver Gelatin Based Emulsion Making & Coating' started by Photo Engineer, Apr 14, 2012.

  1. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    The book and DVDs are moving. Modest but nice sales with some good comments. My thanks to all. It will take some time to see if sales justify a Volume II, "Advanced Photographic Emulsion Making and Coating" (or whatever).

    It might be useful to comment on the negative remarks made by some on these topics though.

    It has been suggested that I am trying to "force" the Kodak method on the emulsion making community. Well, I have to say that what is true at Kodak is also true at Fuji and Agfa and Ilford. After all, science dictates this to emulsion makers, not me, and as I say in the book, form follows function.

    Ok, so how do I "dictate"? The Azo type emulsion came from a teaching formula at RIT.. I modified it with the help of Dr. Bruce Kahn from RIT and a former EK emulsion maker. I improved it by reducing aggregate formation, pepper grain, and also improved speed and repeatability. I also learned how to make it in 3 grades. I could not get (at that time) all of the chemicals for making "real" Azo, and one method escaped my attention. So, I used a method from Agfa Lupex to control contrast which turned out to be almost identical to the Kodak method after I had looked into the methods involved. You see, form follows function. Kodak used a different chemical but got the same results.

    Anyhow, to continue, the Kodabromide like emulsion is a molar conversion of the Azo type emulsion with mass redistribution to compensate for contrast, speed and the tendency of AgBr to be even more aggressive in formation of aggregates. No Kodak, Fuji or Agfa involved at all here. Just Trial and Error (T&E). It works. However, where Kodak used Cadmium and Mercury, I substituted methods used by Agfa and also known by me to work. This was to make it more palatable for use in home darkrooms.

    The ISO 40 emulsion came straight from Baker, but I modified it to make it more repeatable and also I updated the sensitization step due to the lack of active gelatins. Oh, the same goes for the above as well in case you wondered. Again, no Kodak or Fuji. No agfa either. And again, it required a lot of T&E.

    Last but not least, I worked hard to get those coating blades made. They use a tried and true method that came from EK and others, including the paint industry. It is claimed by some that these blades have an inherent design fault. Frankly, if there is one, the claimants don't say what it is but I am aware of none. Many people out there are using them. The blade is used at EK in 4 forms, one for paper and three types for film. The purpose of the heavy blade made of SS is to hold the support down flat, keep the emulsion in the "well" hot, resist corrosion, resist scratching and spread evenly in quantity and width over the surface of the support without wearing away or changing undercut. Other materials don't do all of this.

    So, the idea of a coating blade like this was endemic to the industries that needed to coat uniform thin layers over a broad width. Kodak coated up to 42" using this basic method. I tried other methods, but this is the best and the least messy. Wire wrapped rods come in second IMHO. We go downhill from there.

    Anyhow this one does involve Kodak, but also any industry that uses coatings. There are many of them out there and I really don't care what anyone uses. I merely wanted to get a high quality method out there as there are so many low quality methods out there, or so many of dubious quality. After all, you can use a paintbrush to apply the emulsion, but every time I bring it up, the students try it and are not really satisfied with the results even if the coatings are unique in appearance, or the students just refuse to try it at all. Why, you can even soak your paper support in the emulsion in a tray or float it face down on the emulsion in a tray to coat it.

    So, there you have some of the back story about the response to the book and the methods presented in it and some of my answers.

    About the only Kodak thing I use is Kodak terminology for many of the items involved. I have a multi page dictionary in the back of the book to help the reader on that. If there are any Fuji, Agfa or Ilford people willing to present their work, I have yet to hear from them. They could write interesting books themselves I'll warrant.

    Thanks all for the response.

    PE
     
  2. Jerevan

    Jerevan Subscriber

    Messages:
    2,031
    Joined:
    Nov 19, 2004
    Location:
    Sweden/Germany
    Shooter:
    35mm
    Good to hear that the book and DVDs are selling in nice numbers. :smile: I am going to buy them, as soon as I can get the money to do so.

    I think you are doing the community a service, now and in the coming (darkish) future.

    I also think of the more scientific side of emulsion making as meaningful to pursue, to strive for excellence. To help people who want to, get as good a result as is possible without buying a lab. Even the most ardent "artiste" will eventually see that some good equipment and methods helps along, getting faster to the results you need, be it brushed or coated in some other way. (whatever happened to the spin-coating experiment?)

    In the end, the more people who make emulsions, the better. Low or high-tech does not matter, it's just means to a specific end.

    So take all that to heart. If you did not do all this work, nobody else would.
     
  3. ezwriter

    ezwriter Member

    Messages:
    129
    Joined:
    Sep 18, 2011
    Shooter:
    Medium Format
    Always enjoy your podcasts on the APUG radio show. Love the way you can explain things in plain English. Keep it up!
     
  4. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Sorry I haven't been following too closely lately, but how do we order the book/DVD set?
     
  5. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    David;

    You can contact me via PM or e-mail for order information or you can order them from the Formulary.

    For those in Europe, you can order them via Fotoimpex.

    PE
     
  6. fotch

    fotch Member

    Messages:
    4,824
    Joined:
    Mar 16, 2005
    Location:
    SE WI- USA
    Shooter:
    Multi Format
    Sounds like some people are jealous, for what reason, who knows. The majority respect your knowledge and experience, and are smart enough to learn from it. That is what counts. Keep up the good work.
     
  7. Sirius Glass

    Sirius Glass Subscriber

    Messages:
    20,586
    Joined:
    Jan 18, 2007
    Location:
    Southern California
    Shooter:
    Multi Format
    I am disappointed in Formulary's listing of your book. There is no information about the book or the author. Does Formulary pay for their website by the letter or by the word.

    I suggest that you look into listing your book at FreeStyle and some other stores/websites.

    Steve
     
  8. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    I guess I never particularly thought about it. But, I must leave their business to them. I have commented on it enough here. Now there, 3 Points of View in one sentence! :wink:

    PE
     
  9. Sirius Glass

    Sirius Glass Subscriber

    Messages:
    20,586
    Joined:
    Jan 18, 2007
    Location:
    Southern California
    Shooter:
    Multi Format
    But the marketing of your book is your responsibility.
     
  10. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    I have to say, it is pretty hard to find, if you're not in the loop. I tried Googling various ways before asking directly in this thread, and I could only find it at fotoimpex.de after a few attempts, and didn't turn it up at the Formulary. I also tried searching APUG and couldn't turn up the post stating where the book was available, despite having used the APUG search engine, oh, at least once or twice before.

    I had a suspicion it might be at the Formulary, but hunting around their website I couldn't find the books section. Who would have guessed that I should click on "Labware/Bottles" to find books? Until you mentioned in a PM that it would be there and I looked further, I'd just assumed they'd stopped selling books altogether.

    So as far as marketing the book goes (and for the past couple of years, the marketing of books has become a significant portion of my job description), I think you're 95% there--you're really active on a number of internet forums, you're doing workshops, and you have all sorts of people interested in what you're doing, and they know who you are and that you have a product to sell. Up to this point, I'd say you have a wildly successful guerilla marketing campaign, that probably doesn't even involve a penny spent on print or internet advertising (or if you or your vendors have bought advertising, I haven't seen it). Your potential customers just don't know, unless they are following very closely, where to send the check to obtain the product.

    You have a recognizable name and a recognizable internet handle, so the Formulary would sell more books if they gave you an author bio and made the page accessible to search engines, not to mention making it easier to find books on their website. "Labware/Bottles" indeed!

    And it wouldn't hurt to have other ways of buying it, if you don't have an exclusive agreement with the Formulary (and if you do, they should be doing more for you)--Freestyle, Artcraft, GEH if they sell books, and Amazon (if you don't have ideological objections to Amazon) are all reasonable possibilities.
     
  11. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    I agree with all comments BUT...

    1. I have given the URLs to find it here several times. It does not show up in an APUG search.

    2. It is advertized by APUG in the rotating ads at the bottom of each page. It is there along with Bob Shanebrook's book. ATTN: SEAN... Is this how successful your bottom of page ads are? :D :D

    So, you see, I thought these things would work, but now I know they don't, at least not very well. Of course, NYS dept of taxation and finance had no trouble finding me at all! :D

    PE
     
  12. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    I'm seeing the ad for Shanebrook's book right now, but haven't noticed yours, which doesn't mean it's less visible, necessarily--just that I haven't noticed it, and spending a fair amount of time on APUG, these things may whiz past me more than other readers.

    As far as the search engine goes, it's probably hard to differentiate the posts where you have the URL from the other posts about the book, and I'm not sure how to address that. I may have another solution, but let me run it by the other moderators first.
     
  13. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Okay, I just saw your ad after a few rotations. How about including your name in the ad? I know you are trying to be modest, neutral, and scientific, but I suspect some people might see "Photographic Emulsion Making, Coating and Testing" and say "Oh, that sounds really interesting, but I think I'll wait for Ron's book to come out."
     
  14. Sirius Glass

    Sirius Glass Subscriber

    Messages:
    20,586
    Joined:
    Jan 18, 2007
    Location:
    Southern California
    Shooter:
    Multi Format
    I had the same experience, but it took me 20 minutes to find it. Then there was no information about the book. I guess that the do not want to sell the book or the products one would use by following the book.
     
  15. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    Ok, well, IDK how to put this, so here goes!

    Sean designed the ad! And, there is only so much that can go in that thumbnail, so I guess he was not wrong.

    Also, I okayed it, so my bad!

    PE
     
  16. dehk

    dehk Member

    Messages:
    890
    Joined:
    Aug 4, 2010
    Location:
    W Michigan
    Shooter:
    Multi Format
    Can you also put the link in your signature of your post? Just a suggestion. BTW, loved the podcast the other day.
     
  17. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Actually, this is what I would suggest, but I wanted to run it by the other moderators first to be sure we have a consensus in favor, and we do, so please, go ahead and add a link to your signature. We're usually okay with people promoting their own books, workshops, and exhibitions this way, since it tends to be fairly low key.

    Well, there's probably a reason why the Marketing guys don't usually get invited to the meetings in the IT and Engineering departments, and the IT and Engineering guys don't usually get invited to the meetings in the Marketing department.
     
  18. Ray Rogers

    Ray Rogers Member

    Messages:
    1,555
    Joined:
    Aug 27, 2005
    Location:
    Earth
    Shooter:
    Multi Format
    We would be very lucky indeed to actually have Kodak's methods taught to us.
     
    Last edited by a moderator: Apr 15, 2012
  19. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
  20. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,946
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    As a signature? Sure, if it fits, or even better, I'd just link "fotoimpex" and "photo formulary.
     
  21. kb3lms

    kb3lms Subscriber

    Messages:
    872
    Joined:
    Jun 24, 2006
    Location:
    Reading, PA
    Shooter:
    35mm
    There is also lulu.com if you have any interest in download on demand.
     
  22. holmburgers

    holmburgers Member

    Messages:
    4,423
    Joined:
    Aug 13, 2009
    Location:
    Rochester NY
    Shooter:
    Multi Format
    I think that changing your signature Ron is a great idea. That will retroactively change all your posts (ever) to have that signature.

    Marketing is so important and I'll 2nd that so far, your book remains somewhat on the DL (down-low for all those over 30... :tongue:).

    This might be a long-shot, but how often does a book on Emulsion making come out?? Imagine if the Brit. J. of Phot. did a story on it. Have you considered a "press-release" of sorts?, as silly as that may sound.

    PF doesn't even say the name of the author. Wow. The description is just the table of contents, which is really not the space or place to present this. This is where the sell should be happening. I'd be more than happy to draft something up if you're interested.

    I want the ball to start rolling for this book, and I think we need to start kicking it around!
     
  23. Mustafa Umut Sarac

    Mustafa Umut Sarac Member

    Messages:
    4,574
    Joined:
    Oct 29, 2006
    Location:
    İstanbul
    Shooter:
    35mm RF
    A little bit more information with a real photograph at the ads would not hurt anyone and may be an bikini woman with a glass rod in her hand :smile:
    Saying I love glass rods especially Rons :smile:)
     
  24. bsdunek

    bsdunek Subscriber

    Messages:
    1,351
    Joined:
    Jul 27, 2006
    Location:
    Michigan
    Shooter:
    Multi Format
    I agree. As an engineer with 50 years experience, I fine that several industries that make similar products use similar methods. Everyone just gravitates to what ever works best, and keep learning at trade shows, industry groups (like SAE) etc. To say you're forcing the "Kodak Way" down ones throat is ludicrous. Nobody's forcing anyone to buy your book or use your methods.
    As fotch said, "keep up the good work"! We enjoy and learn from your posts.
     
  25. Photo Engineer

    Photo Engineer Subscriber

    Messages:
    25,781
    Joined:
    Apr 19, 2005
    Location:
    Rochester, NY
    Shooter:
    Multi Format
    Thanks guys.

    Best wishes to you all as well.

    Pe