Split-grade printing and Leitz Focomat v35

Discussion in 'Enlarging' started by Jzlo, Jul 13, 2011.

  1. Jzlo

    Jzlo Member

    Messages:
    2
    Joined:
    Jul 13, 2011
    Shooter:
    35mm
    I just started a photography class at my university and they have the Leitz v35 colorhead enlargers as well as some besseler standard enlargers. Thanks to this forum I discovered split grade printing and wanted to try it, but had a few simple questions. Would I be able to do split grade printing with the Leitz, or should I just use the besselers that have built in contrast filters. When i tried Les McLean's technique, for some reason I was getting really dark prints. Not sure if I was using the right filter/enlarger combination, or was just choosing the wrong exposure time from the test strips. Any advice would be appreciated, thank you.
     
  2. ic-racer

    ic-racer Member

    Messages:
    7,511
    Joined:
    Feb 25, 2007
    Location:
    Midwest USA
    Shooter:
    Multi Format
    If you have multigrade heads available, I'd use those. Next best would be a color head and a table.
     
  3. Ronald Moravec

    Ronald Moravec Member

    Messages:
    1,272
    Joined:
    Jan 17, 2005
    Location:
    Downers Grov
    You can use either perfectly well.

    Make trial prints with max magenta to get the blacks, then make a max magenta with good blacks and overlay with trials of max yellow.

    With the VC head, just use 5 for black and zero for white.

    This whole split thing is a big waste of time and paper except for very specific prints like where you need to burn in highlights. For grade 2/3/4 you get the very same result with without split.

    You can also print with normal contrast and do an overburn with #5 or 150 magenta to get better blacks.

    Save yourself a lot of time.
     
  4. Jzlo

    Jzlo Member

    Messages:
    2
    Joined:
    Jul 13, 2011
    Shooter:
    35mm
    Thank you for the responses ic and Ronald. Ronald for the overburn I just bump up the magenta and give it a second exposure after the regular exposure? Thanks.
     
  5. Bob Carnie

    Bob Carnie Subscriber

    Messages:
    5,543
    Joined:
    Apr 18, 2004
    Location:
    Toronto-Onta
    Shooter:
    Med. Format RF
    Sorry to disagree but split printing is not a huge waste of time.
     
  6. Thomas Bertilsson

    Thomas Bertilsson Subscriber

    Messages:
    15,254
    Joined:
    Jan 21, 2003
    Location:
    Minnesota
    Shooter:
    Multi Format
    The real value of split grade printing is the ability to dodge and burn INDIVIDUALLY at different filter grades, which helps you interpret the negative in nearly limitless ways.

    You can't do that with a single contrast filter.



     
  7. Blighty

    Blighty Subscriber

    Messages:
    902
    Joined:
    Oct 11, 2004
    Location:
    Lancaster, N
    Shooter:
    Multi Format
    Hear, hear!
     
  8. bill@lapetelabs.com

    bill@lapetelabs.com Member

    Messages:
    56
    Joined:
    Jul 5, 2009
    Location:
    Boston, MA
    Shooter:
    Large Format Pan
    Split filter printing with a multigrade head such as the Arista vcl 4500 has the advantage of being able to go full blue and full green without touching the enlarger (no vibration) The control box is off to the side of the enlarger and allows you complete timer control of each exposure and the ability to burn or dodge on HC or LC! When changing filters on a single light source (Regular) enlarger you always risk vibration, this is also true with most color heads. Since you have to reset the filter on the head!
     
  9. Thomas Bertilsson

    Thomas Bertilsson Subscriber

    Messages:
    15,254
    Joined:
    Jan 21, 2003
    Location:
    Minnesota
    Shooter:
    Multi Format
    A very cool thing about the Leitz Focomat V35 is that it is so sturdily built that even though you adjust things on either a multigrade head or a color head, it never goes out of alignment. Ever. It is pin sharp no matter how many adjustments you make, and that's one of the many reasons I love that enlarger.

    It's a damned fine enlarger.