The guy who does CLA's on Yashica RF's

Discussion in '35mm Cameras and Accessories' started by j-dogg, Jun 16, 2012.

  1. j-dogg

    j-dogg Subscriber

    Messages:
    1,322
    Joined:
    Jun 26, 2010
    Location:
    Floor-it-duh
    Shooter:
    Multi Format
    Who was it? he worked as a factory service tech for Yashica.......need to send in my Lynx 14e for a parallax adjustment
     
  2. zsas

    zsas Member

    Messages:
    1,961
    Joined:
    May 12, 2011
    Location:
    Chicago, IL
    Shooter:
    35mm RF
  3. McFortner

    McFortner Member

    Messages:
    405
    Joined:
    Apr 6, 2009
    Location:
    Stockbridge,
    Shooter:
    Multi Format
    Mark Hama is a god when it comes to Yashica work. I've used him for my Electro 35 GSNs and my Yashica 44 CLAs. Worth every penny, he stands 100% behind his work.
     
  4. j-dogg

    j-dogg Subscriber

    Messages:
    1,322
    Joined:
    Jun 26, 2010
    Location:
    Floor-it-duh
    Shooter:
    Multi Format
    That's the name I was trying to remember.....I knew it was a 4-letter.

    APUG delivers again.

    My Lynx has lived a great life, at least in my hands.....I did the seals when I got it and cleaned the lens with some industrial stuff from work....its had this problem for a while I've been zone focusing or doing a lot of infinity focus stuff with it, but with the addition of my Mamiya 645 and an RB67 in the near future this will be my primary and only manual 135 so I figured it's time to get right.