Thermaphot UCP-403 - any clue as to pricing?

Discussion in 'Darkroom Equipment' started by Tom Kershaw, Aug 10, 2010.

  1. Tom Kershaw

    Tom Kershaw Subscriber

    Messages:
    2,948
    Joined:
    Jun 5, 2004
    Location:
    South Norfol
    Shooter:
    Multi Format
    Not looking to buy just yet, but any clue as to used pricing on the UCP-403?

    Tom
     
  2. Mike Wilde

    Mike Wilde Member

    Messages:
    2,935
    Joined:
    Aug 10, 2006
    Location:
    Misissauaga
    Shooter:
    Multi Format
    I bought a used fujimoto cp31 with w/d module about 3 years ago for $300CAN, with a 300km round trip to pick it up.

    It needed a lot of cleaning up, and a thermostat replacement on one tank, but otherwisde it looks very similar in capability to the unit you have your eyes on.

    It makes printing RA-4 quite a lot more pleasant than drying tubes and pouring chems in and out all night long.
     
  3. hoffy

    hoffy Member

    Messages:
    2,334
    Joined:
    Jan 21, 2009
    Location:
    Adelaide, Au
    Shooter:
    Multi Format
    If you lived in Australia, you could look at this one:

    Thermaphot ACP 505

    Not sure if that is a good price....
     
  4. Tom Kershaw

    Tom Kershaw Subscriber

    Messages:
    2,948
    Joined:
    Jun 5, 2004
    Location:
    South Norfol
    Shooter:
    Multi Format
    hoffy,

    I have a ACP 505. Looking at the UCP for Ilfochrome potential.

    Tom