Toning withe berg copper toner

Discussion in 'B&W: Film, Paper, Chemistry' started by Luseboy, May 29, 2010.

  1. Luseboy

    Luseboy Member

    Messages:
    252
    Joined:
    May 26, 2010
    Location:
    Marin, Calif
    Shooter:
    Multi Format
    So I have recently made my own darkroom, and Its come to the point where id like to try some toning. I am most likely going to get some berg copper toner from calumet, but im wondering what the process of toning entails? how do you do it? from what i understand, you of course expose the paper under the enlarger, then develop, stop, fix, wash, then tone, and wash again? or do you dry after the first wash, and go back and tone? Id love any advice, recommendations, and anything you have to say about toning. And a recommendation of which toner to buy would be a good thing too, i like the idea of the berg because it allows for toning at different intervals.
    thanks,
    Austin
     
  2. MattKing

    MattKing Subscriber

    Messages:
    17,041
    Joined:
    Apr 24, 2005
    Location:
    Delta, BC, Canada
    Shooter:
    Multi Format
    The berg copper toner is nice, but it functions more like a dye than other more traditional toners.

    As with most toners, you can decide which is more convenient for you - either tone as part of your processing workflow (after wash) or dry your prints and then re-wet and tone and re-wash on a later day.

    I prefer some of the more traditional toning processes (selenium, sepia, etc.) but the decision as to which you like most is incredibly subjective.

    One thing though, toners like this do not add any archival protection.

    If you can find a copy of Tim Rudman's Toning book, I would heartily recommend it.

    As an aside, most of the threads that discuss toning are found either in the alternative processes forum or the Black and White film and paper forums, so if you are looking for more info, it would be good to look there.

    Oh, and welcome to APUG :smile:
     
  3. clayne

    clayne Member

    Messages:
    2,836
    Joined:
    Sep 4, 2008
    Location:
    San Francisc
    Shooter:
    Multi Format
    If you want to start experimenting with toning you should pick up a bottle of Kodak Rapid Selenium Toner and go from there. Copper toning is actually quite easy but not suitable for general toning use. Sure it's a fun toner to experiment with, but Selenium is equally fun and most importantly: more useful.