Tools, cleaning agent and lubircants to repair/clean Isolette II

Discussion in 'Camera Building, Repairs & Modification' started by baachitraka, Oct 30, 2013.

  1. baachitraka

    baachitraka Subscriber

    Messages:
    2,448
    Joined:
    Apr 6, 2011
    Location:
    Bremen, Germany.
    Shooter:
    Multi Format
    Hello there,

    I may jump into dirty pond soon but before I need to know about the tools, cleaning agent and lubricants to repair and clean the Isolette II first.

    Also, May I know whether the simple shutters like prontor have one mechanism for shutter speeds. If I remember correctly, that advance shutters like one in Rolleicord do have two mechanisms one that takes care of slow speed and the other the fast ones.
     
  2. shutterfinger

    shutterfinger Member

    Messages:
    1,359
    Joined:
    Feb 25, 2013
    Location:
    San Francisco Peninsul
    Shooter:
    4x5 Format
    These are good for any make of camera:
    Tools: jewelers screwdriver set. small adjustable wrench. spanner wrench for retainer rings.
    Examples: http://www.amazon.com/Stanley-66-03...83156615&sr=8-1&keywords=jewelers+screwdriver , http://www.amazon.com/Crescent-Adju...6700&sr=8-2&keywords=4+inch+adjustable+wrench , http://www.skgrimes.com/products/spanner-wrench

    Cleaner/degreaser: Electronic contact cleaner such as http://www.crcindustries.com/auto/?s=05103. Isopropyl Alcohol. Naphtha provided it is not used on plastic or rubber parts. Many will suggest lighter fluid which contains naphtha but it leaves an oily residue.
    Do not use cleaners such as denatured alcohol as it will dissolve adhesives and may remove protective coatings on shutter and aperture blades, lacquer thinner as it will remove protective coatings on parts and may remove some paints or varnishes.

    Lubricants: White lithium grease where grease is called for. Clock/watch oil, gun oil, or similar oil for precision devices. I use TriFlow http://www.triflowlubricants.com/Tri-Flow_Superior_Drip_Lubricant.html .


    All shutters have a delay gear train consisting of several small parts in a housing and is serviced as a unit. Some have limited adjustment while others have two or more adjustment points. Most shutters adjust the delay for the 1 second setting only and other speeds by swedging or filling the speed selector ring, Compur adjust for the 1 second and 1/15 second settings with newer ones adjusting for the 1/500 second setting also.