Transitioning to Ilford

Discussion in '[Partner] ILFORD PHOTO' started by viridari, Aug 3, 2011.

  1. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    I know it's a lot easier to complain than praise online. I thought I'd take some time to offer praise, backed by money spent.

    The time that Simon Galley takes to communicate with his customers here has impressed upon me the sort of values that I'd like to see in the companies that I do business with. To that end, I've begun transitioning key consumables in my workflow to Ilford products. This isn't meant to bash any of the products that I am transitioning from, which are all good products, but I don't feel confident that they will be around for long.

    I picked up some Ilford Ilfosol 3 developer and Ilford Rapid Fixer today. Still have quite a bit of Tri-X in the freezer but when that is gone, I'll evaluate the Ilford products and very likely end up making a full commitment to one of the products I test from Ilford's lineup.

    Your products aren't exactly the most value-priced over here, to be honest, but I don't want to have to change film emulsions every couple of years and you have impressed upon me that you're in it for the long haul, and that any product I standardize on today will probably still be available for the foreseeable future.
     
  2. ic-racer

    ic-racer Member

    Messages:
    7,473
    Joined:
    Feb 25, 2007
    Location:
    Midwest USA
    Shooter:
    Multi Format
    Seems like every 3 years I transition to Ilford products. I'm no fan of Kodak, but Tmax film and Tmax developer are so good I keep coming back.
     
  3. BetterSense

    BetterSense Member

    Messages:
    3,126
    Joined:
    Aug 16, 2008
    Location:
    North Caroli
    Shooter:
    35mm
    The great thing about Ilford is their products are available across all formats. I'll have no problem when I have to, for example, shoot HP5 in everything. I love TMY, but it's not available in 8x10 anymore. Tri-X isn't available in sheets at all.

    But then again Ilford doesn't make color film...
     
  4. Jeff Kubach

    Jeff Kubach Member

    Messages:
    6,930
    Joined:
    Sep 29, 2007
    Location:
    Richmond VA.
    Shooter:
    Multi Format
    I like Ilford, I use other stuff , but still like Ilford!.

    Jeff
     
  5. Colin Corneau

    Colin Corneau Subscriber

    Messages:
    1,871
    Joined:
    Nov 20, 2007
    Location:
    Brandon, MB
    Shooter:
    Medium Format
    I like the 'values' angle, too. Simon has been terrific here on APUG and that says something about Ilford.

    I use some other films here and there but Ilford is the mainstay. Quality is never ever an issue and I do like the idea that they are committed to the long haul.
     
  6. olleorama

    olleorama Member

    Messages:
    526
    Joined:
    May 10, 2009
    Shooter:
    Multi Format
    Same here. I tried, on recommendation from a shop, fp4+ for the first time in several years, and I had completely forgot how freakin' good it is. It will be my slow speed film from now on.
     
  7. michaelbsc

    michaelbsc Member

    Messages:
    2,106
    Joined:
    Dec 18, 2007
    Location:
    South Caroli
    Shooter:
    Multi Format
    Canham had a special order for TMY2 8x10 a few months ago, and I have a dozen boxes in the freezer.

    He is trying to get an order together for 5x7 as well, but not as many folks are jumping in on that size.
     
  8. Jeff Kubach

    Jeff Kubach Member

    Messages:
    6,930
    Joined:
    Sep 29, 2007
    Location:
    Richmond VA.
    Shooter:
    Multi Format
    Fp4t is a great film but so is Acros Neopan 100.

    Jeff
     
  9. edp

    edp Member

    Messages:
    198
    Joined:
    Oct 7, 2009
    Shooter:
    Multi Format
    Ha. Try buying the same stuff in England. Sometimes it would be cheaper to reimport it from the USA.
     
  10. Peter Schrager

    Peter Schrager Subscriber

    Messages:
    2,070
    Joined:
    Jul 19, 2004
    Location:
    fairfield co
    Shooter:
    Large Format
    yes-kodak makes the best film ever and then goes and shoots themselves in the foot....TMY2 should be available in all sizes...I'm using FP4 for my whole plate camera and like it very much....
    Tri-x not available in sheet size?? you had better recheck your info...
    have a great day...Peter
     
  11. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    Well I tried some Delta 400 in Ilfosol 3 (1+9), 7 minutes at 20C with three gentle inversions every minute. It didn't grab my eyeballs like the same film in Rodinal 1:50. Perhaps some more experimentation is called for.
     
  12. 2F/2F

    2F/2F Member

    Messages:
    8,003
    Joined:
    Apr 29, 2008
    Location:
    Los Angeles,
    Shooter:
    Multi Format
    I did the same about five years ago, and for similar reasons. Now I have mostly come back to Kodak because Ilford's prices simply got too high for me, and they did it really quickly. The paper and chemicals are particularly ridiculous in price. While other brands of paper such as Oriental have gone up maybe 5 to 10 percent in the past five years, Ilford's have gone up about 30 or 40 percent in the same time period. And I cannot argue with Arista Premium while it lasts. I still shoot Delta 3200 and from time to time SFX, because there are no equivalent products from other manufacturers. But for paper, chemicals, and other films, I use Kodak, Efke, Adox, Oriental, Fotokemika, etc. Principle can only be taken to the point of affordability in my case. And Kodak films are so outstanding...and Ilford's papers so bland in my eyes, compared to all the others out there (and for significantly less money).

    Kodak Flexicolor Fixer is so cheap that – as long as it is being made – buying any other general-purpose fixer makes no sense to me. It's about $10 for 5 gallons worth of the stuff (film dilution) cannot be beat unless you are mixing from powders. How much Ilford fixer does one get for about $10? 20 percent as much. Ridiculous!

    Apparently Ilford needs the money badly (poor sales, maybe?), and/or they are trying to position themselves as "The Luxury Photo Supplies Brand" simply by inflating prices. In the latter case, I think they are jumping the gun. The market is not quite to the point where film is a boutique item.
     
  13. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    [​IMG]

    Hopefully I can link to that image without too much trouble. That should explain a lot about what's going on with B&W film prices now. Those who haven't jacked it up yet will be once they have to buy more silver.
     
  14. Sponsored Ad
  15. 2F/2F

    2F/2F Member

    Messages:
    8,003
    Joined:
    Apr 29, 2008
    Location:
    Los Angeles,
    Shooter:
    Multi Format
    If that was the only reason for Ilford's price increases, then the percentages of price rises should be similar to other manufacturers. But see my comment above. Their price rises in the past five years on paper are at least 4x the rises of my favorite competitor, Oriental. And it is NOT just products containing silver. Chemicals have gone up significantly, and the price of silver should have no effect on that. Some possible explanations floating around in my mind are as stated above: the business is suffering badly and they have figured that these are the prices they need to charge to stay afloat, or it is a premature attempt at positioning themselves for an "elite" group of film users.
     
    Last edited by a moderator: Aug 7, 2011
  16. markbarendt

    markbarendt Subscriber

    Messages:
    7,516
    Joined:
    May 18, 2008
    Location:
    Beaverton, OR
    Shooter:
    Multi Format
    Well of course more experimentation is called for. :D

    Just checked the Ilford data sheet and unless you shot it at about EI 250 or so I think you probably under developed it.

    Have you tried Delta 100?
     
  17. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    I pulled the 7m figure from the Massive Dev Chart as a starting point. I suppose that since I was using Ilford film & developer, I would have had better luck starting with their data sheet. Lesson learned? Maybe.

    I've worked with Delta 100 in Rodinal before and was pretty happy with it. Though honestly unless I'm doing a portrait or fashion shoot with my monolights, chances are I'll be shooting in anything from overcast to dark indoor conditions (bars & night clubs). So I had been using Tri-X for everything from EI 200-3200.
     
  18. markbarendt

    markbarendt Subscriber

    Messages:
    7,516
    Joined:
    May 18, 2008
    Location:
    Beaverton, OR
    Shooter:
    Multi Format
    I actually have had great luck with Delta 400 over the whole range you have been using Tri-X for.

    With an incident meter I normally shoot at box speed and develop with DD-X per ilford instructions and print at grade 2.
     
  19. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    Thanks for the pointers. I know this film can do better, based on previous experience using it with Rodinal. I'll try some DD-X next time I stop at the local camera shop.
     
  20. 2F/2F

    2F/2F Member

    Messages:
    8,003
    Joined:
    Apr 29, 2008
    Location:
    Los Angeles,
    Shooter:
    Multi Format
    One way to never be able to get the same results twice, be they good or bad, is to constantly be switching films and developers. Pick a few things and stick with them until they are nailed down, IMO. There isn't much one cannot do with a simple general purpose developer like ID-11, Ilfotec HC, or DD-X. But always switching from one to the other simply because your last roll didn't turn out well will not serve you well. There is nothing wrong with any of these developers, or any of Ilford's films, that will cause bad results related directly to the materials. Metering, developing, and printing are the likely issues that cause people to say they dislike a film or developer. But most developers and films are very general-purpose oriented, and with diligent technique and trial and error, any combination of standard film and standard developer can produce results that are great. We each just need to put in the time to learn how to work with them.
     
  21. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    I'm not hopping around. I've been using Tri-X and Rodinal. I'm transitioning to Ilford products with the intention of finding my new standard film & developer. That rather calls for a bit of experimentation.
     
  22. 2F/2F

    2F/2F Member

    Messages:
    8,003
    Joined:
    Apr 29, 2008
    Location:
    Los Angeles,
    Shooter:
    Multi Format
    I wrote that because you said you'd try some DD-X for your next roll because the Ilfosol wasn't to your liking.

    My point was that a developer change will likely serve you worse than trying a change in routine with the developer you are already using. In other words, it wasn't the fault if Ilfosol in and of itself. Every material takes trial and error to nail down, and one cannot do that by trying once and then switching to something else.
     
  23. Ottrdaemmerung

    Ottrdaemmerung Member

    Messages:
    258
    Joined:
    Jul 27, 2010
    Location:
    Memphis, TN
    Shooter:
    Multi Format
    Ilfosol 3 is better with conventional films, like Tri-X, FP4+, HP5+, etc. DD-X is particularly suited for T-grained films like TMax and Ilford's Delta line.
     
  24. viridari

    viridari Member

    Messages:
    330
    Joined:
    Dec 14, 2008
    Location:
    Raleigh, Nor
    Shooter:
    Multi Format
    Ah ok gotcha. The guy at the camera shop didn't seem as familiar with pairing Ilford's film & developers. Thanks.
     
  25. Roger Cole

    Roger Cole Member

    Messages:
    5,480
    Joined:
    Jan 20, 2011
    Location:
    Atlanta GA
    Shooter:
    Multi Format
    Eh? I see 320 TXP listed everywhere I check.

    http://www.freestylephoto.biz/1791367-Kodak-Tri-X-Pro-320-iso-4x5-50-sheets-TXP?cat_id=404

    I don't believe that ISO 400 TX has ever been available in sheets.

    No argument that Ilford makes great products.
     
  26. jp498

    jp498 Member

    Messages:
    1,467
    Joined:
    Oct 5, 2009
    Location:
    Owls Head ME
    Shooter:
    Multi Format
    I've got Arista, Foma, and Ilford paper. They can all make decent images. The Ilford has the least drydown of my choices. Saves me time and materials even though the paper is a little more.

    The Ilford MGRC warmtone (in dektol) is my favorite paper for the majority of prints. They've got something special that a generic silver paper does not have. Subjective choice I know, but I like it.

    So I end up using the arista mostly for contact prints and the Ilford for enlargements. The foma makes good enlargements too, but it's more work to get things right with bigger drydown.

    Nothing wrong with Ilford film, but I'm using Kodak TMY2 right now and sticking to it.

    Been doing the Kodak Film and Ilford Paper combination for about 23 years now. Never was a huge fan of Kodak's polycontrast papers and didn't mind when it went away.