Use Durst M601 with CLS66

Discussion in 'Enlarging' started by Adri van Loenhout, Nov 23, 2010.

  1. Adri van Loenhout

    Adri van Loenhout Member

    Messages:
    62
    Joined:
    Dec 13, 2004
    Location:
    Hoeven, Holl
    Shooter:
    Medium Format
    I recently used the above combination for my prints. Now I have in my Ilford Multigrade paper an overview of the settings for the different levels (divided into 1/2-units). It is indicated for Durst (max 170) and Durst (max 130). The settings of my CLS66 will not be higher than 100 for each channel. Is this a date type? Can someone help me with the gradation settings for this CLS-head? Or I might assume a conversion percentage of the numbers in the table of 170 or 130?
    Adri
     
  2. ic-racer

    ic-racer Member

    Messages:
    7,485
    Joined:
    Feb 25, 2007
    Location:
    Midwest USA
    Shooter:
    Multi Format
    I'd try the "130" table and see how it works as-is. For '00' and '5' use your 100 instead of 130, and there may be some exposure shift with the two extreme values, but the middle range may work out OK.