What is the exposure factor?

Discussion in 'Pinhole Photography' started by delphine, Feb 2, 2009.

  1. delphine

    delphine Member

    Messages:
    628
    Joined:
    Jun 7, 2007
    Location:
    London (UK)
    Shooter:
    Medium Format
    Hi,

    I am looking at a pinhole camera online, and in the description, it says:

    Aperture equivalent 225
    Exposure factor for f22: 105

    What does this mean?

    I have never used a pinhole camera, so I am inexeperienced with its jargon.

    Thank you and have a good day, from snowy London !

    Delphine
     
  2. doughowk

    doughowk Subscriber

    Messages:
    1,735
    Joined:
    Feb 11, 2003
    Location:
    Jacksonville
    Shooter:
    Multi Format
    Not being into pinhole cameras, but presume its same as filter factor and bellows factor. So, you would need to calculate the log of 105, which I think is around 6.5; and that number would be the number of stops (or time multiples) below a light meter reading of a scene.
     
  3. Pinholemaster

    Pinholemaster Member

    Messages:
    1,504
    Joined:
    Oct 17, 2005
    Location:
    Westminster,
    Shooter:
    8x10 Format
    More important than exposure factor, you need a snow shovel!!!

    As Doug says, the exposure factor allows one to calculate the added exposure needed due to reciprocity failure of the film when shooting with a pinhole that is f/225. You'll need to experiment by running tests to see if your film is to your liking when you factor in the extended exposure time.

    I have found that shooting with pinhole cameras is not as precise as the formulas for exposure calculation dictates.

    A good tool to have when shooting with a pinhole camera is this: http://www.pinholeresource.com/shop...roduct_id=91&category_id=16&keyword=Black+Cat
     
  4. rwyoung

    rwyoung Member

    Messages:
    704
    Joined:
    Apr 18, 2006
    Location:
    Lawrence, KS
    Shooter:
    Multi Format
    Pinholemaster said it. I can calculate the factor and it usually gets me pretty close the first time I test a new paper (although I've standardized lately on Arista grade 2 RC) in a camera. Likewise for film there are equations that predict the reciprocity curve.

    If you are interested, here is a quick way (at least to me) to get into the ball park.

    1) Know the ISO of the film in your camera. Using, HP5+, then call it ISO 400 (yes, we can argue all day about the real speed but this is just an example). Using Arista Edu.Ultra graded #2 photo paper, then pick ISO 8 as a starting point. Again, with photo paper, they don't have ISO numbers the same way film does, the ISO number you might find in the instruction sheet refers to use with enlargers, not as "film".

    2) Meter your scene with your meter or eyeballs calibrated for the "Sunny-16" rule. With pinhole cameras I pretty much go with Sunny-16. So a nicely lit outdoor scene with distinct shadows would be 1/ISO at f/16. 1/400 for my HP5+ or 1/8 for my paper negative.

    3) Know the f-stop of your pinhole camera. Focal length / diameter. f/225 in your camera above so lets use that. The magic happens here, base line factor will be:
    factor = (fstop camera / fstop meter) ^ 2 or (225 / 16) ^ 2 = 198 (liberally rounded up). The "^" means raise to the power so "^ 2" is squared. -- (225 / 22)^2 = 105 as was already given in your original post.

    4) Apply factor, we said 1/400 and 1/8 depending on film choice so that becomes 198 / 400 and 198/8 or 1/2 second for the HP5+ or 25 seconds for the photo paper. Again, I was pretty liberal with the rounding because frankly you won't tell the difference between 24.75 and 25 seconds. :smile:

    At this point you could be happy and shoot merrily away. It is possible to further correct for reciprocity failures. I do this with film when I get calculated exposures of greater than 1 second, I have made up some charts that I can reference and it seems to be close enough but I also have the full equation to run through too. With photo paper as my negative, I've just fiddled around enough to know that calling the Arista EDU.Ultra #2 ISO 8 is close enough for my developer and printing later. YMMV on that part.

    For me, the simplicity comes in the field because I use the Sunny-16 rule for my exposure estimation and I've precomputed the 4 stop range I generally encounter and just have it on a little slip of paper.
     
  5. delphine

    delphine Member

    Messages:
    628
    Joined:
    Jun 7, 2007
    Location:
    London (UK)
    Shooter:
    Medium Format
    Thank you for the information and the pointers ! It was not that silly of a question after all.

    And yes, the snow shove would prove rather useful... I just measured 18cm of snow on my balcony!

    Thank you from your comprehensive answers,

    Best

    Delphine