Will a SIXNEG carrier work on a Durst M670?

Discussion in 'Darkroom Equipment' started by stonedronin, Sep 25, 2012.

  1. stonedronin

    stonedronin Member

    Messages:
    1
    Joined:
    Sep 25, 2012
    Shooter:
    Medium Format
    I've just been given a used Durst M670. The negative carrier seems to be missing a few parts. It's called the sixma apparently. I'm not too sure. The only negative carrier I could find on ebay was the SIXNEG. Would that work on a Durst M670 head?
     
  2. intratom

    intratom Member

    Messages:
    2
    Joined:
    Sep 4, 2012
    Shooter:
    Medium Format
    I had the same issues a few weeks back when I got hold of a M670, it came with a UNINEG carrier but no masks. I looked everywhere for the SIXMA and SIVOMA but couldn't find them. In the end I got hold of a SIRIONEG 6x6 carrier with all the bits and it fitted perfectly.

    I found this while researching....scroll the very bottom for the different carrier configurations - the naming conventions are a nightmare !

    http://www2.durst.it/shop/pdf/consumer_e.pdf

    The sixneg isn't listed and after looking at it on ebay it seems be a different construction entirely from the 2 carriers I have.

    hope this helps
     
  3. quine666

    quine666 Member

    Messages:
    21
    Joined:
    May 25, 2007
    Location:
    Pittsburgh,
    Shooter:
    Multi Format
    The SIXNEG is for the M600, which is a much older 6x6 enlarger (though also very nice in its own way).

    -andrew