Wooden film holder: neoprene instead of felt?

Discussion in 'Camera Building, Repairs & Modification' started by argus, Apr 5, 2005.

  1. argus

    argus Member

    Messages:
    2,146
    Joined:
    Dec 14, 2004
    Shooter:
    Multi Format
    I'm making a wooden film holder atm.
    When looking for some nice felt (filt?) to glue where the dark slide goes in, I stumbled on 1.5mm thick black neoprene. It looks dense enough to function as a light trap.
    It looks useable to me as it won't get worn as quickly and will not keep dust.

    Has anyone already tried this?

    G
     
    Last edited by a moderator: Apr 5, 2005
  2. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member Moderator

    Messages:
    17,940
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    I don't know about that. I have some really old filmholders with perfectly good felt light traps and things made of neoprene that have started to crumble in less than five years. I don't know if neoprene lasts longer in the dark, so that might be a consideration. I think felt might be a better choice in case of high humidity, when neoprene might cause the darkslide to get stuck on the way in or out.
     
  3. argus

    argus Member

    Messages:
    2,146
    Joined:
    Dec 14, 2004
    Shooter:
    Multi Format
    You have got a point there.

    G
     
  4. John Koehrer

    John Koehrer Subscriber

    Messages:
    6,368
    Joined:
    Apr 3, 2004
    Location:
    Montgomery,
    Shooter:
    Multi Format
    Argus,
    Many of the older holders(poetic, Yes?) used velvet for the light trap material. You can purchase velvet ribbon by the yard at fabric shops.
    Also it is available in different widths.
     
  5. rjr

    rjr Member

    Messages:
    409
    Joined:
    Aug 30, 2004
    Location:
    Mosel, SW Ge
    Shooter:
    Medium Format
    Argus,

    12 month ago I decided to try neoprene as a lightseal in my Kiev back (old type) - I cut a strip of 0,5mm thick foam to size, installed it, inserted the darkslide and let it rest for a week. After that the foam adapted to the slide and sealed the slot tightly.

    It worked very fine, better than the original Kiev/Hasselblad seals with foam and mylar foil - until last week. I lost a whole roll due to a light leak, the neoprene shrunk lengthwise and opened a tiny leak, just enough to fog the negative diagonal. :-(

    I remember when I cut the stuff that I wanted to check the seal after 12 months... I didn´t, and I paid for it. <g>