WTB--Linhof 2x3 Technika/Tech 70 lensboard Copal #0

Discussion in '[Classifieds] Want to Buy' started by David A. Goldfarb, Mar 31, 2010.

Thread Status:
Not open for further replies.
  1. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member

    Messages:
    17,922
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Looking for a Linhof modern style (not the earlier silver Technika III style) Copal #0 lensboard for the Tech 23/Tech 70/Wideangle Focusing Device.
     
  2. werra

    werra Subscriber

    Messages:
    334
    Joined:
    Mar 12, 2007
    Location:
    Tallinn, Est
    Shooter:
    Multi Format
    Something like this? Ruler units are centimeters.
     

    Attached Files:

  3. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member

    Messages:
    17,922
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Yes that should work, but let's wait a bit and see if there isn't one a little closer to New York. Meanwhile, you can PM me and let me know how much you want for it, and if you can take PayPal. If it involves an international bank transfer, it's not worth the fee at this end.
     
  4. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member

    Messages:
    17,922
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    I think I'm mistaken. This is for a 00 shutter, not a 0 shutter, so I don't think it will work. Even if I were to drill out the board, the shutter will likely not fit in the recess. But thanks again for posting.

    If someone is interested in the 47/8 Super-Angulon I'm selling and needs a Tech 23 lensboard for it, that would be perfect, because it's in a 00 shutter.

    A Copal/Compur #0 lensboard should have a hole that is 36.4mm, which is the one I need.
     
    Last edited by a moderator: Mar 31, 2010
  5. gordrob

    gordrob Subscriber

    Messages:
    449
    Joined:
    Jan 29, 2005
    Location:
    Western Cana
    Shooter:
    Multi Format
    Hi David
    Are you looking for a recessed or flat lens board and does it matter if it has the cable release holder on it?
    I have a new flat Technica 2x3 lens board with the cable release holder with the 36mm hole

    Regards
    Gord
     
  6. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member

    Messages:
    17,922
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Gord, that's fine. I'd prefer a flat board without the cable release holder, because I don't use that system, but it's easy enough to remove the cable release socket, if no one has one without. In any case, send me a PM and let me know how much you would like for it.
     
  7. David A. Goldfarb

    David A. Goldfarb Moderator Staff Member

    Messages:
    17,922
    Joined:
    Sep 7, 2002
    Location:
    Honolulu, Ha
    Shooter:
    Large Format
    Okay, looks like I'm set.
     
Thread Status:
Not open for further replies.