WTB: Unicolor, ... etc. roller base

Discussion in '[Classifieds] Want to Buy' started by Usagi, Jul 4, 2011.

  1. Usagi

    Usagi Member

    Messages:
    360
    Joined:
    Apr 17, 2007
    Location:
    Turku, Finla
    Shooter:
    Multi Format
    I am looking for a simple roller base for table top rotary processing.
    The roller must be compatible with 220V/50Hz.
     
  2. bushpig

    bushpig Member

    Messages:
    307
    Joined:
    Aug 3, 2010
    Location:
    Escaped Bake
    Shooter:
    Medium Format
    I hope you find it.

    Check eBay. I just got one from there. If all else fails, you can just roll your drum by hand on a table or countertop.
     
  3. Usagi

    Usagi Member

    Messages:
    360
    Joined:
    Apr 17, 2007
    Location:
    Turku, Finla
    Shooter:
    Multi Format
    Not very easy to find. I have seen only couple, all listed in US ebay, thus requiring 220V/110V converter.

    So I am still looking for. Anything that can handle Jobo 3010. Simma, Beseler, Durst, ...
     
  4. Greg Davis

    Greg Davis Subscriber

    Messages:
    1,994
    Joined:
    Feb 4, 2004
    Location:
    Nicholasvill
    Shooter:
    8x10 Format
    Don't get a Chromega. They work just fine, but not with the Jobo drums. They only run in one direction but use a side to side wobble that makes the drum walk off the end.
     
  5. bushpig

    bushpig Member

    Messages:
    307
    Joined:
    Aug 3, 2010
    Location:
    Escaped Bake
    Shooter:
    Medium Format
    My bad. I didn't realize where you were located.

    Good luck.