WTB Zeiss or ICA 9x12cm plate holders marked 739/6

Discussion in '[Classifieds] Want to Buy' started by mferrarini, Nov 8, 2009.

  1. mferrarini

    mferrarini Member

    Messages:
    30
    Joined:
    Aug 26, 2006
    Shooter:
    Multi Format
    If you have any of these please let me know.
     
  2. Ian Grant

    Ian Grant Subscriber

    Messages:
    17,939
    Joined:
    Aug 2, 2004
    Location:
    West Midland
    Shooter:
    Multi Format
    Can you elaborate, what do they look like ? By that I mean what are the edges etc like.

    I have spare holders that don't fit any of my 5 9x12 cameras back in the UK and will be there next Sunday.
     
  3. mferrarini

    mferrarini Member

    Messages:
    30
    Joined:
    Aug 26, 2006
    Shooter:
    Multi Format
    Thank you for your interest. The holders are for an ICA Klappreflex-Kunstler camera. I've never actually seen one but I obtained the model number from an individual who had one of these cameras. I suspect that they are double sided and quite similar to other ICA and Zeiss holders of the period (737/12 for 10x15cm, and 737/6 for 9x12cm Juwel, if you are familiar with any of these). My camera came with a film pack holder. The dimensions of this holder are 11x17.5cm overall. The "face" of the holder is 11x17cm. The long sides have approx 2mm wide x 2mm deep "edges" that fit into corresponding slots in the camera back. The holder slides in and is secured by a "catch" that fits into a small cut-out in the top of the holder approx 3cm from the rear edge. I would post some photos but I haven't yet got on the digital bus.....
     
  4. Jun.C

    Jun.C Member

    Messages:
    4
    Joined:
    Mar 27, 2008
    Location:
    West Sussex,
    Shooter:
    Multi Format
    Hello, I have a couple of the 739/6. I have posted photos on my imageloop slideshow: http://slideshow-298.bilmokonun-bilmokonyan.imageloop.com/en/index.htm
    Let me know if you still need this and if you would like to make me an offer. Cheers!