WTT camera and watchmaker miniature lathes for Deardorff S11 backs and bellows

Discussion in '[Classifieds] For Trade' started by Randy Moe, Oct 17, 2013.

Thread Status:
Not open for further replies.
  1. Randy Moe

    Randy Moe Member

    Messages:
    243
    Joined:
    Dec 14, 2011
    Location:
    Midwest USA
    Shooter:
    Multi Format
    I have small camera, watchmaker lathes and mills to trade for Deardorff S11 studio camera backs and bellows.

    I am only interested in Deardorff S11 backs and bellows.

    No other cameras or things.
     
  2. Randy Moe

    Randy Moe Member

    Messages:
    243
    Joined:
    Dec 14, 2011
    Location:
    Midwest USA
    Shooter:
    Multi Format
    I'll do pictures later, after I see Clyde Butcher's new show.

    I have 2 Borel and 2 Unimat's.
     
  3. Randy Moe

    Randy Moe Member

    Messages:
    243
    Joined:
    Dec 14, 2011
    Location:
    Midwest USA
    Shooter:
    Multi Format
    Well, things are going well. I now have 4 various SC11 backs, all I will ever need and a second center standard. So I am looking for the long shot, used bellows and/or advice on where to best purchase new ones. The trouble with new ones is, to make it all 'wonderful' requires 3 new sets at about $1000. Yikes!

    Deardorff has offered to make new ones at a fair price, but I prefer used ones at this moment in my economic destruction.
     
Thread Status:
Not open for further replies.