XA self timer problem - always on

Discussion in 'Rangefinder Forum' started by Eric Rose, Jan 11, 2008.

  1. Eric Rose

    Eric Rose Subscriber

    Messages:
    4,382
    Joined:
    Nov 21, 2002
    Location:
    Calgary AB,
    Shooter:
    4x5 Format
    I have played with the lever etc and nothing helps. Every time I go to take a photo the self timer activates. Very frustrating to say the least. The batteries are practically new. Any suggestions on fixing this issue that doesn't include sending it away for repair?
     
  2. John Koehrer

    John Koehrer Subscriber

    Messages:
    6,263
    Joined:
    Apr 3, 2004
    Location:
    Montgomery,
    Shooter:
    Multi Format
    Are you handy Erik?

    It's easy access to the switch and contacts. It's right under the lever itself.
    I'm not sure what you're going to find in there, there are a couple of switch contacts printed on a circuit board and the sw. contacts on the bottom of the lever. I don't remember how the circuit works though.
    Three screws(4?) & the cover pops off.
    Other things that also pop off are the front cover and the detent roller. The front cover will just lift off. The roller is about 3-4mm long & 2-3mm in diameter and under the cover. When you reassemble the camera. put the bottom cover back on, the roller detent in position & "wrap" the front cover in place starting at the bottom/front of the camera it'll just snap into place. If you do this in the "closed" position you should have no trouble with aligning the switch.
    You also need to be aware that the fr. cover also closes the main switch when it is slid open, so you need to make sure it engages properly after you've assembled it. If it's not turning the camera on or, letting it turn off when it's closed, you need to pop the cover off & reinstall it.
     
    Last edited by a moderator: Jan 11, 2008
  3. Xmas

    Xmas Member

    Messages:
    6,419
    Joined:
    Sep 4, 2006
    Location:
    UK
    Shooter:
    35mm RF
    Hi Eric

    My XA4 is the same, if I can fix mine I'll post fix, if you fix yours please post.

    Noel
     
    Last edited by a moderator: Jan 13, 2008