Zone VI 6x7cm Negative Carrier - Hinged EN5767

Discussion in 'Darkroom Equipment' started by payral, Oct 15, 2013.

  1. payral

    payral Member

    Messages:
    381
    Joined:
    Sep 14, 2004
    Location:
    France
    Shooter:
    8x10 Format
    Do you think is still possible to find a Zone VI 6x7cm Negative Carrier for enlarger Type 2 ?
    At least the under part even without the hinged one.
     
  2. Neal

    Neal Subscriber

    Messages:
    1,562
    Joined:
    Dec 3, 2004
    Location:
    Chicago, Wes
    Shooter:
    4x5 Format
  3. payral

    payral Member

    Messages:
    381
    Joined:
    Sep 14, 2004
    Location:
    France
    Shooter:
    8x10 Format
    Thanks Neal, I saw it but:
    Shipping:
    Does not ship to France | See details
     
  4. ROL

    ROL Member

    Messages:
    792
    Joined:
    Oct 27, 2005
    Location:
    California
    Shooter:
    Multi Format
    The 6x7 hinged Z-VI is a lovely, simple carrier for the TII, but it isn't necessary to make fine prints with. If you have any of the other larger neg carriers, you can just use those with, mat board (or such) masks. And if you're concerned about film flatness you can place other makes of 4x5 glass carriers, or just tape-hinged glass, over or in place of a larger Z-VI windowed carrier to work with just about any format 5x7 or less. Which is all to say that there are a lot of options if you fail to source the real thing.