Zone VI fiber print flattener/uncurler

Discussion in '[Classifieds] For Sale' started by frobozz, Mar 11, 2010.

  1. frobozz

    frobozz Subscriber

    Messages:
    1,361
    Joined:
    Feb 19, 2010
    Location:
    Mundelein, I
    Shooter:
    35mm
    $35 + shipping (UPS in US should be about $15).

    [​IMG]

    In pretty good shape, couple of little cracks in the paint here and there.

    Duncan
     
  2. George Collier

    George Collier Member

    Messages:
    1,064
    Joined:
    Feb 23, 2005
    Location:
    Richmond, VA
    Shooter:
    Multi Format
    What are the dimensions, including longest adjustable setting?
     
  3. frobozz

    frobozz Subscriber

    Messages:
    1,361
    Joined:
    Feb 19, 2010
    Location:
    Mundelein, I
    Shooter:
    35mm
    The deck is 11" wide though obviously the prints can hang off the edge. The distance on the deck between the bottoms of the two angled walls, when adjusted to the widest distance, is 10" SO it makes sense that I've seen it referred to as a flattener for "up to 11x14 prints" For completeness' sake, the full length of the unit in the other dimension (how much table space it needs) is 14". And I think I have it sold (I have accepted an offer, and if they follow through then it is sold.)

    Duncan
     
  4. frobozz

    frobozz Subscriber

    Messages:
    1,361
    Joined:
    Feb 19, 2010
    Location:
    Mundelein, I
    Shooter:
    35mm
    SOLD

    Duncan