Zone VI - Type I Enlarger Chassis

Discussion in '[Classifieds] For Sale' started by Keith Pitman, Aug 14, 2010.

  1. Keith Pitman

    Keith Pitman Subscriber

    Messages:
    217
    Joined:
    Mar 21, 2004
    Location:
    Pine Junctio
    Shooter:
    Large Format
    This is a Zone VI-Type I enlarger chassis. IT IS NOT A COMPLETE ENLARGER. With some searching, the other components to assemble a complete enlarger can be located. Shows use, but in overall very good functional condition. $40, plus shipping (about $25 CONUS-only).

    [​IMG]
     
  2. Keith Pitman

    Keith Pitman Subscriber

    Messages:
    217
    Joined:
    Mar 21, 2004
    Location:
    Pine Junctio
    Shooter:
    Large Format
    Still available. Open to offers. Would hate to toss out!
     
  3. Keith Pitman

    Keith Pitman Subscriber

    Messages:
    217
    Joined:
    Mar 21, 2004
    Location:
    Pine Junctio
    Shooter:
    Large Format
    I still have this. Good base for a DIY enlarger project.
     
  4. Doc W

    Doc W Subscriber

    Messages:
    551
    Joined:
    Nov 7, 2009
    Location:
    Ottawa, Cana
    Shooter:
    Large Format
    I am looking into building a 5x7 or 8x10 enlarger. Will this accommodate the larger negs?
     
  5. Keith Pitman

    Keith Pitman Subscriber

    Messages:
    217
    Joined:
    Mar 21, 2004
    Location:
    Pine Junctio
    Shooter:
    Large Format
    I have two Zone VI Type II enlargers. One is set up for negatives up to 5x7. The other is set up for 4x10 and 8x10 negatives. I believe the Type I chassis could be used for 5x7 and 8x10. I only have the chassis. You would have to source or construct the other components. Also, shipping, especially out of the US may be costly. I would sell the chassis for $40. Shipping is on you. Let me know if you need other info. I think I have a picture an a list of the other components you would need to complete an enlarger.