APUG - View Single Post

c.d.ewen · 11-06-2007, 10:11 AM

[quote=panoramic;541930
It's been a while since I've measured one, but I believe .013 was the correct original thickness. I suspect .012 or .014 would work.

Ron[/QUOTE]

Thanks, Ron.

I could only measure the edge of the broken section, still attached to the arbor and wound tight in the case. It's a little rough looking, and, of course, not a flat surface, so my measurement is prone to being over.

Charley

11-06-2007, 10:11 AM	#6 (permalink)
c.d.ewen Join Date: Jan 2005 Posts: 122	[quote=panoramic;541930 It's been a while since I've measured one, but I believe .013 was the correct original thickness. I suspect .012 or .014 would work. Ron[/QUOTE] Thanks, Ron. I could only measure the edge of the broken section, still attached to the arbor and wound tight in the case. It's a little rough looking, and, of course, not a flat surface, so my measurement is prone to being over. Charley