My 1st impressions after shooting in a Nikon FE Micro Nikkor 55/2.8 and developing in the special developer 1+15 for 8 minutes:
- Base is very thick and sturdy, easy to load in the spirals but my scissors fell from the table and pulling the final tab from the roll was very hard. It has a nice color (almost trasnparent)
- No curling
- I exposed the film as EI32, ina copy stand with flash/artificial lights which burnt some highlights (for scanning) but should be OK for darkroom printing It maybe better to rate this as EI64 for artificial lighting
- The last frames were exposed outdoors and those seems to be fine as EI32
Looking through a 8x loupe I could not see grain, I'll try looking thorugh a microscope to find any grain.
Examples in Flickr
and a 100% crop
