View Single Post
Old 07-18-2008, 10:30 AM   #7 (permalink)
galyons
 
galyons's Avatar
 
Join Date: May 2003
Location: San Francisco Bay Area
Posts: 273
Default

Quote:
Originally Posted by Ian Grant View Post
There's the Canadian dealer/importer who always has a lot of De Vere stuff on Ebay, he might have a transformer, I think it will help the bulbs last significantly longer.

As Martin says Odyssey are very helpful, contact them and ask who the US importer is.

Ian
Thanks Ian,
I did contact KHB in Canada. He was very helpful. The cost of a refurbished Transtab is about $1100US and the new, equivalent replacement is $1300US.

I have stripped down the head and found that the current reduction board going to the "shutter" is also dead. My game plan is to run 250 watt 120V EHN bulbs and replace the board to the shutter with a small 24v DVC transformer. The fans run on 120 VAC. The 8 pin plug had lamp/shutter voltage on the top 4 pins and fan voltage on the 4 lower pins. The Devere control Box puts out 120 VAC on all 8 all 8 pins. So it will be "Plug 'n' Play"!

This will get the head operational while I decide whether to convert to LED's. If I don't convert to LED's then I may source and appropriate 24VDC regulated transformer.

Cheers,
Geary
__________________
But your flag decal won't get you into Heaven any more. They're already overcrowded from your dirty little war.
Now Jesus don't like killin' no matter what the reason's for, and your flag decal won't get you into Heaven any more. – John Prine
galyons is offline   Reply With Quote Ignore this user Ignore this thread Ignore this forum