View Single Post
Old 05-11-2009, 11:12 PM   #1 (permalink)
BetterSense
 
BetterSense's Avatar
 
Join Date: Aug 2008
Location: Dallas, TX
Posts: 1,582
Eumig C3 regular-8

I inherited this camera long ago and since I got a projector, I ordered a roll of Ektachrome 100. The problem is that the meter does not work, at least it's not to be trusted, because the needle is sticky. So I am left to my devices.

I can divine from information in the manual that it has a shutter angle of about 160* for a shutter speed at 24fps of right at 1/50s or so. So I can use a meter or my best guess and set the aperture accordingly, but I would have to trust that the camera's aperture markings are accurate. Since I somehow doubt they are, I will have to cross my fingers and do some bracketing for my first roll.

Besides all this, I won't be able to shoot in daylight at this rate since the camera only goes to f/16. The camera has filter threads but they are tiny, so I guess it's time to get the tape out.

I've never shot 8mm before. From what I gather you basically waste the first few feet of every roll as a "light shield" during reloading.

If someone else has camera and knows if the aperture settings hold up or any other quirks, that would be great to know.
BetterSense is offline   Reply With Quote Ignore this user Ignore this thread Ignore this forum