New Compensating Process Timer

Quote:

---

Originally Posted by Les McLean

This may not be relevant but I have used the MkI version quite close to my 5 x 4 developing trays for some years without fogging film. Quite close is at eye level on the wall directly behind the tray in the wet bench which is just above waist level and about 30" from the timer.

---

The MkII version is physically identical to the MkI so it's quite relevant! Thanks Les. This is a good time to remind owners of the MkI that upgrades will be available, although the details have yet to be finalised.

Yes, the first batch went out yesterday. There are still a few to go from the advance orders but they should be sent before the end of this week.

I've updated our web site with the latest information and specs, and you can now read the User Manual online.

I looked carefully at the specs and saw to my surprice that the countdown time is set to 10 seconds? I'am correct?
My second question is about the ATC.
What about temperatures for processing C-41 and E-6 they all above the 35ºC. Is the ATC still working at that high degree?

Quote:

---

Originally Posted by hka

I looked carefully at the specs and saw to my surprice that the countdown time is set to 10 seconds? I'am correct?
My second question is about the ATC.
What about temperatures for processing C-41 and E-6 they all above the 35ºC. Is the ATC still working at that high degree?

---

Hi Harry,

Yes, it is back to 10 seconds again. I was unable to change Chris's mind on that one I'm afraid.

We don't recommend using ATC (automatic temperature compensation) with colour processes, they are designed to work at specific and accurately maintained temperatures and changing the temperature can adversely affect the results.

Wait, there's a 10 second countdown for each step after you hit the footswitch? Or what?

Quote:

---

Originally Posted by jstraw

Wait, there's a 10 second countdown for each step after you hit the footswitch? Or what?

---

No, there is an audible countdown of the final ten seconds in a step, to prompt you to start pouring the chemicals out of the tank/tray/whatever.

Quote:

---

Originally Posted by RH Designs

No, there is an audible countdown of the final ten seconds in a step, to prompt you to start pouring the chemicals out of the tank/tray/whatever.

---

Whew. That sounds good to me. What's the objection then?

Quote:

---

Originally Posted by jstraw

Whew. That sounds good to me. What's the objection then?

---

What do you do if you have a tank that takes longer to dump (like the Nikor sheet film tank, for example)? Well, what you do is adjust the time for each step to compensate, but it might be nice to have a variable countdown time. Of course if it's a daylight tank, you can just look at the timer readout.