- Color contact printing?
- Duping 35mm negatives onto another roll
- Ortho film fogged.
- Hansa contact printer
- Film curves and contact printing
- Lodima Fine Art update--Orders Accepted for Test Run
- ? re: interpositives
- cleaning 5x4 glass plates
- Paper for negatives intended for AZO
- The good, the bad and the ugly
- Contact print on curved surfaces
- Brumberger 5x7 contact printer question
- Diffuser needed for 'bare bulb' light source?
- A market for handcoated/small batch silver chloride paper?
- F***ING SCRATCH
- Rewire print head?
- Printing Contact Sheets- Help
- Lith Contact Printing?
- Temporary alternative to split-back frame?
- Contact Print Storage or Filing
- Wood specks from contact frame
- printing snow as white but keeping texture
- Um, just a curiosity
- Soft areas in contact print highlights
- Vacuum or CPF for 14x17, 16x20?
- Vacuum Pump... Noise?
- Enlager and contact printer
- Got a new printer, may need rewiring
- POP-paper in combined physical and chemical developing
- Negatives for Enlarging vs. Negatives for Contact Printing
- Signing Contact Prints
- Newton's Rings / Tmax100 & Rodinal
- Bostick-Sullivan: contact printing frames question
- Status of Lodima Fine Art update 11/27/07
- Glass vs. plastics in splitback frames
- Splitback frames - post some pictures please
- Enlarger + VC: enlarging lens quality
- basic elements of contact printing
- polaroid film suppliers?
- Contact printing...misinformation?
- Classic, Non-Coated Camera Lens for Contact Prints Only?
- Plan for 2 8x10 negs side-by-side
- Contact Frame - Hinged Back or not?
- help with contact printing
- Paterson 8x10 proofer vs. split back printing frame
- Segmented panoramics
- Advice on hardware for contact printing
- 10x8 Negs drying marks
- Film Neg contact printed to neg film = Positive?
- Centennial Printing Out Paper