PDA

View Full Version : Two part Repair Tech Question: Who still works on Rolleiflexes?



Uncle Bill
07-02-2012, 07:09 AM
I got a two part repair tech question

One, my series E Rolleiflex is acting up, it had an overhaul at Kinderman two years ago but I am now having challenges with the film not advancing beyond the first frame. I have to fire off the shutter twice to get it to go to frame two. I know it is something to do with the roller alignment. So who in the GTA is qualified and does amazing work on Rolleiflexes?

I guess the second part to this post is who is still in the repair business in the GTA? I think it's time to find out who is still active out there, what their camera specialities are and wether or not they do a good job.

dpurdy
07-02-2012, 07:33 AM
I know you have been using Rolleis long time but if the problem is just advancing the film after frame one are you sure it is not accidentally hitting the double exposure button when you put a roll of film in? I know I was plagued with that for awhile, something in how I held my camera putting in a roll of film I tripped that double exposure button.

Other than the guys usually mentioned for repairs, (Harry Fleenor at Oceanside camera repair or Krikor in New Jersey, I hear that Paul Ebel is good:
Paul Ebel Lens Services
420 21st St North suite #2
Menomonie, WI 54751
USA
651 335 8759

Not in the GTA but not that far away.

jnanian
07-02-2012, 08:08 AM
not in the GTA but an apug sponsor/advertiser
you might consider sending it to zack's camera repair
i sent my rolleicord to him ( actually brought it to him since i live 20 mins away )
it works like a charm !

Axle
07-02-2012, 09:24 AM
Camtech, 588 Concession St. Hamilton, ON. I have gotten two Yashicas (MAT 124G, 12) overhauled and fixed, also my Rolleiflex 2.8F overhauled and cleaned there.

GuyS.
07-02-2012, 09:41 AM
For anyone looking for Rollei service in the UK, I can thoroughly recommend Brian Mickelboro. He repaired and serviced my Rolleiflex after I had dropped it, very pleasant to deal with, quick and fairly priced.

Uncle Bill
07-02-2012, 04:46 PM
I know you have been using Rolleis long time but if the problem is just advancing the film after frame one are you sure it is not accidentally hitting the double exposure button when you put a roll of film in? I know I was plagued with that for awhile, something in how I held my camera putting in a roll of film I tripped that double exposure button.

Other than the guys usually mentioned for repairs, (Harry Fleenor at Oceanside camera repair or Krikor in New Jersey, I hear that Paul Ebel is good:
Paul Ebel Lens Services
420 21st St North suite #2
Menomonie, WI 54751
USA
651 335 8759

Not in the GTA but not that far away.

Good question, I will have to search google for an owners manual and see where the double exposure button is located and see if I'm hitting it. Worst case I'm off to Camtech in Hamilton (aka the Hammer) to have them look at it. As much as I want to send to Harry Fleenor or Krikor, I will leave that as the real last resort. My brother lives in NYC I can have him deal with the logistics.