View Full Version : Where to begin in collodion?

04-19-2013, 07:37 PM
Can someone point me in a good direction to begin with tintype? I have been looking for a workshop here in RI, to no avail; so I would like to start reading to get a foundation. Any recommendations?

Dave Wooten
04-19-2013, 08:16 PM

Touch base with Quinn Jacobsen

Dave Wooten
04-19-2013, 08:26 PM

Touch base with Quinn Jacobsen

04-20-2013, 12:47 AM
You don't need to take a workshop. Wet plate is not hard. In fact it is, chemically, one of if not the simplest type of silver halide photography. There are a lot of people who describe it as a "hard won craft", that takes "years of experience", but they are just perpetuating the mystique that has built up around it. You might want to purchase John Coffers guide. No need for the DVDs. But, everything you need to learn can be found in a google search over a week or two.

Let me also add that the instructions that come with B&S kit are good, too. Dont need anything more. If you want to save like $100, buy the chems yourself and mix them. But make sure you have an accurate scale.

Dave Wooten
04-20-2013, 08:09 AM
Bostic and Sullivan,
Book and on line videos by Quinn
Book by Will Dunniway
Also Alternative Photography website.

Note and adhere to all safety precautions given.

07-22-2013, 09:34 AM
Just an update. I was fortunate enough to have a workshop pop up here in Providence at AS220! Three weekends, with mostly hands on work. Here is 1 of my first three plates that I made yesterday! Loving the process so far.


Greg Heath
09-16-2013, 09:43 AM

09-16-2013, 04:03 PM
Definitely learn from a pro, and don't try to "wing it" like so many that come onto these forums with a myriad of questions and problems for months after starting. Their mistake? Believing they can learn by reading 5 different practitioners, usually who have less than a few months experience themselves. I moderate Quinn's forum, and trust me, all we ever get now are newbies coming on with the most rudimentary questions and wild misunderstandings. If you buy a manual, you will probably have good plates the first or second session, or in about 2 weeks. If you take a workshop, you'll have good plates that day. If you try to learn it by listening to all the other newcomers, reading up on Facebook and Youtube, with no expert advice, you'll be shooting many, many sessions with many flawed plates.