PDA

View Full Version : Ricohflex, adjusting shutter?



titrisol
02-06-2005, 02:28 PM
hi all,
I have a Super Ricohflex, which I use fro fun purposes basically.
The lens had some fungis which I cleaned, and luckily no marks were left. Focus was adjusted for infinty and focusing mechanism was lubed (using high vaccum teflon paste)

Now I believe the speeds are not accurate, and even though I have exercised the camera to improve the leaf-shutter mechanism 1/10 seems to be off.

Any idea on where to find a resource on cleaning/adjusting the shutter for these cameras?

Peter Schrager
03-02-2005, 08:26 AM
Tritisol-You can contact Essex camera repair which is in N.J. I have a Ricoh TLR that I sent to them almost 2 years ago for shutter repair and its still holding up. They specilize in Japanese cameras like these. The guy also seemed to be Japanese. Quick turnaround;fair price to fix. Call them at 201-933-7272
Regards, Peter

titrisol
03-18-2005, 08:35 AM
I tried to adjust this myself.
Found ti to be pretty easy actually.
- Remove the geared ring around the lens (3 screws)
- Remove the front and midle lens elements (I used a piece of rubber and my hands as wrench)
- Remove the white-cosmetic ring by loosening 2 screws
- The metallic ring there is used to set the speeds, note the position of it. And remove it.
- The problem was some gunk in the gear-system of the speed setting. I used some xylene applied with a hypodermic to losen the gunked up grease. After exercising the shutter many times, I applied some teflon-doped oil (sewing machine type).
The "speeds" ring was also gunked up, I took it away and cleaned it with WD40/xylene
- The diaphragm was clean and mving freely so I didn't touch that
- Cleaned each lens element with cotton swab/windex and then used lenspen to remove any lint.
- Put everything back together and collimat to adjust focus to infinity
- Voila!

Next project... djust a prontor shutter with sluggish slow speeds