I recently purchased a 67 series Beseler enlarger on ebay, and like most of the 67's listed there it has no 6x6 negative carrier. This size carrier, for the 67, seems to be rather rare in the used market, but there are a few available for the 23 series and for certain Omega brand enlargers that appear similar in design. Will these other series carriers work in the 67, and particularly, do the detents in the Omega brand carriers line-up with the pins in the 67 enlarger?

Thank you,
Bill

The beseler 23 is round, so that won't work. You can make one out of mat board. Hope this helps.

Jon

The beseler 23 is round, so that won't work. You can make one out of mat board. Hope this helps.

Jon

Looks like I'll have to go this route until something becomes available. Thanks.

Bill

The 6X6 carrier for the 67 series is a square carrier like the the 35MM, but with a large opening for the 6X6 neg. The model number for the 6X6 carrier is 6741. The mat board model will work well as suggested. I used the outline of the 35MM model and then cut a larger opening, until I could find a 6741 on Ebay.

Here is one:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=29987&item=7519910815&rd=1&ssPageName=WDVW

Matt

Here is one:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=29987&item=7519910815&rd=1&ssPageName=WDVW

Matt

Yup, just spotted that one, myself. Thanks.

Bill