View Full Version : 11x14 Copy Work
04-03-2006, 10:52 AM
i am looking for someone who can shoot a single 11x14 transparency (or negative if transparency film is no longer available) of a black and white line drawing which is roughly 9"x9" square. the image should be exactly 1:1.
any suggestions welcome. thanks.
04-03-2006, 11:04 AM
I know this is APUG and I'll be shot for heresy, but why wouldn't you resort to a good scan for this? Curious more than anything.
04-03-2006, 06:28 PM
it's a little bit of a long story. ultimately, the goal is to produce a limited series of about 100 etchings from this piece of original artwork. the lithographer specifically asked for film (actually a "mirror" positive on film). he claimed that the density on digital output is not adequate for his purposes. i did a little investigation (although probably not enough) into digital output and it seemed that the only type of output available was a "duraclear" transparency which is geared more towards display graphics and is only capable of 200dpi. i don't actually know if any or all of this is really true, but it is what i have been told by the few places which i called including some big labs like duggal. if someone could make a digital transparency onto 11x14 film or a "duraclear" at a higher resolution i would be very happy because, so far, i cannot find anyone who is capable of producing this conventionally. at the moment, the backup plan, which is to use 8x10 and sacrifice 1:1 reproduction, is looking like the most likely solution. alas... what has become of 11x14!
David A. Goldfarb
04-03-2006, 07:47 PM
So do you need a positive or a negative image? Do you need a high-contrast line image, or a grayscale image?