View Full Version : HP3 glass plate
05-21-2006, 04:31 PM
I sent a few unexposed HP3 glass plates over to this chap in Sweden as he had been doing some great stuff with home made plates. now, with HP3 he comes up with this lovely image http://www.flickr.com/photos/bosseb/150516798/
05-22-2006, 12:55 AM
I'd say that was well given... :)
06-11-2006, 04:14 AM
Another photo from this package is just uploaded. Had to try how skin tones are treated by the old plates, and I'm happy with the result.
Thanks again, Andrea :)
06-11-2006, 07:27 AM
Took a look at your flickr alt stuff, really nice. Was curious how you would describe the difference in look between glass and film plates? I've never seen a glass plate print. Also, what's a carbon print? Can one adapt a regular 4x5 camera to use glass plates? What lens were the portraits and the hat shot with? Finaly, how do you make and coat your home-made glass plates? Thanks,
06-11-2006, 03:33 PM
The main difference between these plates and ordinary film is mostly from age, e.g. the darker spots and the stains on my uploaded photos. Otherwise there's no big difference when the plates are panchromatic. For homemade plates or really old ones that are orthochromatic you get a quite different look caused by the plates being sensitive only to blue light. You can use any view camera for plates, it's just the holders that have to be different. I found mine on ebay.
I've been using a Radionar 105 lens taken from a 6x9 folding Franka. Not the ultimate 4x5 lens, but I like the look it gives.
When it comes to coating your own plates there's a good article on alternativephotography: http://www.alternativephotography.com/process_dryplate.html
You can read about carbon printing there too: http://www.alternativephotography.com/process_carbon.html
I hope this is to some help :)