PDA

View Full Version : Hopefully this may help someone (rollfilm backs)



SteveH
07-24-2006, 02:15 PM
As usual, no affiliations, etc...Just thought this might help some here (as they seem cheap enough to take a gamble on)

http://cgi.ebay.com/RADA-Rollfilm-Back-Use-120mm-on-your-Plate-Camera_W0QQitemZ290011527483QQihZ019QQcategoryZ470 1QQrdZ1QQcmdZViewItem
http://cgi.ebay.com/Rollex-Rollfilm-Back-Use-120mm-on-your-Plate-Camera_W0QQitemZ290011527471QQihZ019QQcategoryZ470 1QQrdZ1QQcmdZViewItem

Regards,

David H. Bebbington
07-25-2006, 12:48 AM
As usual, no affiliations, etc...Just thought this might help some here (as they seem cheap enough to take a gamble on)

http://cgi.ebay.com/RADA-Rollfilm-Back-Use-120mm-on-your-Plate-Camera_W0QQitemZ290011527483QQihZ019QQcategoryZ470 1QQrdZ1QQcmdZViewItem
http://cgi.ebay.com/Rollex-Rollfilm-Back-Use-120mm-on-your-Plate-Camera_W0QQitemZ290011527471QQihZ019QQcategoryZ470 1QQrdZ1QQcmdZViewItem

Regards,
Good thought to bring these to people's attention BUT ...
I have personal experience of several Rada backs, they are JUNK (would you believe film hanging so slack it gets scratched by the sheath being pulled out?). The Rollex MAY be better but I doubt it, both backs appear to be pre-WWII and are exceedingly unlikely to be in a usable condition.

Regards,

David