Edwardv
08-30-2007, 10:49 AM
By chance does anyone know who anyone or the manufacture of Zone VI columns?
Thank you.:)
Thank you.:)
| View Full Version : Manufacture of Zone VI columns Edwardv 08-30-2007, 10:49 AM By chance does anyone know who anyone or the manufacture of Zone VI columns? Thank you.:) jstraw 08-30-2007, 10:55 AM I'm not sure this is what you're after but Calumet has the 47" columns on the auction site and their own clearance site constantly. Edwardv 08-30-2007, 11:09 AM Thanks for your help. But what I am looking for is the actual company who made the columns for Zone VI. Peter De Smidt 08-30-2007, 01:23 PM Contact Richard Ritter. He used to work for Zone VI in Vermont. A google search will turn up his website. Edwardv 08-30-2007, 01:46 PM Contact Richard Ritter. He used to work for Zone VI in Vermont. A google search will turn up his website. Thank you for the information. Hopeful Mr. Ritter will help me out on a project I have in mind. Eric Mac 08-30-2007, 02:13 PM Richard is a good guy. He answered a couple questions I had about the Zone vi 4x5. Eric JHannon 08-30-2007, 05:18 PM Richard's site: http://www.lg4mat.net/ Richard T Ritter 08-31-2007, 09:21 AM The columns were custom made. When Zone VI bought the columns they would buy a full run about 1000 pounds plus at a time. The company that made the parts kept no stock of the extrusions. The last run was about 5 years ago maybe longer and at that rate the die may be in Calumets hands since they own the die or it could be gone. Edwardv 08-31-2007, 03:04 PM Mr. Ritter, Thank you for the information. I will be sending a letter requesting additional information. Thanks to all that helped. Edward |